Hookline Pointed Single-Cutaway Electric Guitar Kit, Mahogany Body, Flame Maple Veneer, Bolt-On Mahogany Neck, Ebonized Fretboard

Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Intermediate (5/10) Bolt-on neck joint bolts straight on, so there is no gluing or clamping to get right, but the flamed Maple veneer is thin and easy to sand through, so use a light touch at the edges Four controls plus a toggle mean more soldered joints to keep tidy in the cavity Tune-o-matic bridge sets intonation quickly once the posts are seated Body Material: Mahogany (2-3 pcs) Type: Solid Cutaway: Single Binding: None Top Veneer: Flamed Maple Neck Material: Mahogany Joint: Bolt-on Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628 mm / 24.75″ Binding: White Fretboard Material: Ebony Radius: 14" / 356mm Number of Frets: 22 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Block Inlay Material: Pearl White Headstock Shape: Standard (as in product images) Binding: None Nut: Ivory Plastic Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 2 Volume, 2 Tone, 3-Way Toggle Wiring: DIY (soldering required) Wiring Diagram: HH, 2 Volume, 2 Tone, 3-Way Toggle Switch Output Jack: Side jack Hardware Bridge: Tune-O-Matic w/ stopbar Tuners: Closed Pickguard: None Knobs: Black Cavity Covers: Black Strings: Steel Finish: Black What's in the Box Unfinished routed guitar body with a figured top Neck with dark fretted fingerboard and large pearl-look block inlays 6x black sealed tuners with black bushings and washers 2x black covered humbuckers in black mounting rings Pre-wired harness with four potentiometers and a toggle switch Black stop tailpiece Black bridge with individually adjustable saddles 2x bridge posts and 2x tailpiece studs 4x black numbered knobs Output jack on a black jack plate Large angular black control cavity cover Round black switch cavity cover Black neck plate with 4 screws Allen wrench 2x strap buttons with felt washers 1x set of strings with ball ends Black instrument cable Assorted black mounting screws What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.