Honda custom map lights interior kit, pair - Wedge type - 168, T10

Made in USA   Comparison photos to stock begin at 5:23       To Remove light covers & replace light:     Map Lights - 1:00   1. Use provided tool, (recommended to cover the tip with plastic to prevent the scratch), push in to middle side of cover edge lift up and pull down. Should pop out, then repeat for the other side. 2. Pull down on stock light to remove, push new light in (it does not snap just push until its in). If it does not light then pull it out and flip it around and re-install. 3. Push cover back on, will snap in to place     Vanity Lights - 3:31 1. With provided tool, at the bottom there is a inverted tab just insert the tool and lift up the cover will pop loose. 2. Pull the stock light out, push in the new light that its secure in the middle of the prongs. If it does not light then pull it out and flip it around and re-install. 3. Push the cover back in until it snaps in to place     Trunk Light - 3:51 1. Pull down on the light cover from both sides, the cover will pop off. 2. Disconnect the light harness on the left side 3. Pull out the stock light, and connect the new one. 4. Replug the harness and make sure the light works. 5. Push the cover back in, it will snap in to place     Dome Light - 2:40 1. With the provided tool, on each side there are tabs that you will take the flathead side and push in to lift up then pull down. The cover will pop loose. 2. CAREFULLY, pull out the stock light. Be sure to get a good grip on the stock bulb and move slow. You do not want it to pop out in to the headliner 3. Take the connector for the new light and slide it in to the prongs. It does not click to let you know that it is in. If it does not hold in the connector then pull it out, take 2 fingers and squeeze the prongs a little and retest. 4. Flip on the switch to make sure it is working. If it does not light then pull it out and flip it around and re-install.       Adjusting the brightness: The dome and map lights allow you to adjust the brightness with 2 screws   1. With the provided tool, take the flathead side and turn the screw either way to adjust to your brightness 2. For the other light that did not adjust just repeat the step above with the other screw. Dual LED control modules Dual brightness setup for design Dual color possible for mood light Dual color possible for mood light If you want to get the dual color LEDs,  Please choose the Mix and Match option and leave a note. (We will upgrade this site soon for the options)     Dual brightness setup for design   SUMMARY Brand new Free shipping in United States Best quality LEDs, using PWM current control module on the LEDs for longer life expectancy Custom Power LEDs for your interior lights    For Honda map lights 2013~ Wedge type 168 T10   Product contains 1 pair of map lights Lead time - 3 business days   We are an authorized CorsoMotion dealer (Headquarter) We advertise at the lowest price CorsoMotion allows (Ensures valid warranty) Custom made in Los Angeles, California, using OEM reflector housing DETAILS This custom made power LED interior kits provides the 'brightest' light output with stable performance CorsoMotion is the custom LED specialist to many automobile manufacturers.  Why not buy your products from the best? Plug and play style so everybody can install it.     Please contact us with application questions prior to your purchase. CorsoMotion has a MAP policy.  (Minimum Advertised Price.)  We advertise at the CorsoMotion minimum.  If you find someone advertising this product for less, please be aware you will not have a valid CorsoMotion warranty or get free tech support because proof of purchase is required for those processes. If you have questions about MAP please contact us. SHIPPING, HANDLING & RETURNS Shipping cost is based on weight and zip code.  This site does the figuring, not us.  If you feel their calculation is high, you might be underestimating the package weight and/or current shipping costs from our zip code (91706) to yours.  Please don't ding us for shipping in the ratings, as we have no control over ever-increasing carrier rates. We will enter a tracking number into your order details here on the site.  They will email it to you if your notification preferences are set correctly. A signature is not typically required. If you are not home to receive the package, it will most likely be left at your door.  Please monitor it's progress and arrange to collect it when it arrives. This site provides a section/tab in each ad for Shipping information.  We encourage you to check that section for prices, methods, time-frames, etc.