
$68.95
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
What you'll need: A Home Assistant system is required. The Connect ZWA-2 (for Z-Wave), RS-485 adapter, USB-C, Ethernet cables and other accessories are sold separately. The smart home multi-tool Integrate your existing gear into your smart home with Home Assistant Connect AUX-2, the ultimate smart home multi-tool. Stream CD-quality audio directly to your Hi-Fi or AV receiver, perfectly synced with your existing smart speakers. Manage solar setups, TVs, UPSs, and more via its USB and two serial ports. Optimize your Z-Wave network by placing it in the ideal spot in your home, and expand your Bluetooth reach with a dedicated antenna. Power over Ethernet (PoE) enables a clean, single-cable setup, with Wi-Fi and USB-C options ready whenever you need them. Best of all, every purchase funds the development of Home Assistant. KEY MESSAGES 🧰 THE SMART HOME MULTI-TOOL – audio, serial, Z-Wave, and Bluetooth, all at the same time. Just plug it in, and Home Assistant’s wizard helps you set it up. ⚡ POWERFUL OPTIONS – power and data over a single Power over Ethernet (PoE) cable, or use USB-C power with Wi-Fi/Ethernet. 🎶 WHOLE-HOME SYNCED AUDIO – CD-quality analog or optical audio for your Hi-Fi or receiver, in sync with your smart speakers, and ready for Music Assistant. 🎛️ ADVANCED CONTROL – 2× RS-232 and an RS-485* let you control your TV, receiver, or projector even in standby, plus other serial gear. *RS-485 adapter sold separately. 📡 CONNECT ANYWHERE – move your Z-Wave network (Connect ZWA-2) to the best spot in your home. Adapter sold separately. 📶 ROCK-SOLID BLUETOOTH – a dedicated antenna brings Bluetooth smart home devices* into Home Assistant over a stable wired connection (*Bluetooth audio is not supported). 🛠️ BUILT TO BE TINKERED WITH – Built on ESPHome and easy to take apart. Ready to go out of the box, or customize it to your needs. ✅ RELIABLE TO THE CORE – Built by Nabu Casa, providing dedicated support and years of software updates. 🏠 FUNDING HOME ASSISTANT – Every purchase funds the development of Home Assistant. KEY FEATURES In the box: Connect AUX-2, Warranty and Safety Information leaflet, Home Assistant sticker. Supported features: Synchronized whole-home audio with Music Assistant (Sendspin), Home Assistant media playback, RS-232 serial control, RS-485 via USB adapter (sold separately), Z-Wave via Connect ZWA-2 (sold separately), Bluetooth LE proxy. Power and network: Power over Ethernet (802.3af or better) or USB-C, and Ethernet or Wi-Fi. Chips inside: ESP32-S3 (SoC), TI PCM5122 (audio DAC), and W5500 (Ethernet controller). SPECIFICATIONS Product Model No. NC-AUX-9758 Conformity CE, FCC, RCM FCC-ID 2A8ZE06 Origin Made in China Product details SoC ESP32-S3R8 8 MB PSRAM, 8 MB flash Audio DAC TI PCM5122 112 dB SNR Ethernet controller W5500 Power USB-C, 5 V DC, 2 A Power over Ethernet (802.3af or better) Typical power draw Under 1 W Audio Only one audio output can be used at a time. Output 3.5 mm analog or optical (S/PDIF) Output only Analog audio 16-bit / 48 kHz stereo Digital audio 16-bit / 48 kHz stereo PCM Lossless Codecs FLAC, MP3, WAV Whole-home audio Synchronized via Music Assistant (Sendspin) Serial and USB Serial ports 2× 3.5 mm RS-232 (±5 V) TX/RX switch USB-A Connect ZWA-2 (Sold Separately) Waveshare USB-to-RS-485 adapter (sold separately) Connectivity Wi-Fi 2.4 GHz, 802.11b/g/n Bluetooth Bluetooth 5 LE Proxy: up to 3 active connections Ethernet Power over Ethernet (802.3af or better) Ethernet with USB-C power Software Platform Built for Home Assistant Built on ESPHome Bootloader Unlocked, accepts custom firmware Device characteristics Dimensions & weight 106 x 63 x 25 mm, 104 g In box: 110 x 72 x 28 mm, 136 g Enclosure material Polycarbonate plastic Colors: white and semi-transparent Environmental operating conditions Indoor use only 0 °C to 65 °C 32 °F to 149 °F Humidity: non-condensing Keep in dry, not excessively dusty, environment to avoid damage to the unit. Do not leave the unit in direct sunlight or near any heat source, as this can cause overheating. WHAT YOU NEED A Home Assistant system is required to connect and control devices with Connect AUX-2. Connect ZWA-2 (for Z-Wave) is sold separately. RS-485 adapter is sold separately. USB-C and Ethernet cables are sold separately (not included in the box).
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2025
$68.95