HO-AE-ESP18 Electronic Speckle Pattern Interferometer (ESPI)

Electronic Speckle Pattern Interferometer (ESPI) Electronic Speckle Pattern interferometry (ESPI) is a non-destructive optical method for studying surface deformations. It relies on the interference between diffusely reflected light from the test object and a reference beam. This is one of the most sensitive interferometric technique, so that we can measure sub-micron level displacements either in plane or out of plane. The images before and after deformation are recorded by a CCD camera and analyzed using an image analysis software. Deformation causes variations in the fringe pattern. These variations can be analyzed with the help of the software provided to find the deformations. As this interferometer is highly sensitive to vibrational noises, Holmarc's ESPI comes with a Vibration isolation optical breadboard. A linearly polarized 632.8nm He-Ne laser with 5mW output power is used as the light source. A beam splitter splits the laser beam into two. The transmitted beam illuminates the test object uniformly via a spatial filter assembly while the reflected beam falls on a CCD as reference beam. The image of the illuminated test object is captured by zoom lens and CCD. Our ESPI system allows the user to perform the Electronic Speckle Shearographic interferometry in the same system without disturbing the optical set ups and alignments. Holmarc’s camera application software helps to capture and analyze the images. Experiment:    To observe and study the deformation of objects with respect to mechanical and thermal loads using electronic speckle pattern interferometer (ESPI) For ESPI setup we do not need twin images of the sample diaphragm. We only need one image of the diaphragm and the reference beam to get the interference pattern.    To observe and study the deformation of objects with respect to mechanical and thermal loads using electronic speckle shearographic interferometer (ESSI) For ESSI setup we do need twin images of the sample diaphragm but not the reference beam. Specifications:    Laser     He-Ne 5mW @ 632.8 nm     Beam expander     20 X microscope objective with pinhole     Zoom lens     Nikon ®     Camera     1/2.5“ 5 MPC MOS Color     Software     Holmarc camera application software & image analysis software     Optical Breadboard     1200 x 900 mm size with vibration isolation support Features:     Measurement under visible light is possible     Non contact and full field measurements     Object contour and displacement measurements Diagram: Related Topics:  Dispersion     Refractive index     Dispersive power     Angle of minimum deviation     Refraction Grating   Scope of Delivery: Optical Breadboard with Support Spatial filter Assembly Beamsplitter Mount Mirror Mount Test Object Mechanical Loader Glass plate Holder with Mount Diffuser Mount Polarizer Rotator with Mount Camera Lens Assembly with Mount Beamsplitter Mirror with Cell Supply Glass Plate Diffuser Plate Helium Neon Laser CCD Camera with Mount Heater with Control Unit Accessories Allen Key Software CD Thumb Screws Instruction Manual