Hinge Mount - Standard Assembly (Single)

Complete Hinge Mount Assembly With Standard Length Rack Mount (Single Unit). These Are A Universal Adjustable Mount That Can Be Used For Mounting Just About Anything Flat To A Track Or Hard Mounted To A Solid Surface. The Mount Allows Vertical Adjustment In Height From Mounting Surface Through The Two M8 Socket Cap Bolts On The Mount Face. When Used With Zombieracks Assemblies, Width Adjustment Can Be Made Through The Three M8 Socket Cap Bolt Slots On The Hinge Upper Assembly. These Mounts Are Both 1/8" (3.18mm) & 3/16" (4.78mm) 5052 Aluminum With 6061 Hinge Tubes For Superior Strength And Corrosion Resistance* In All Working Environments. Options In The Drop Down Menu Allow You To Choose Both The Desired Mounting Type And Hinge Assembly Finish. Each Unit Contains The Following: (1) Hinge Lower Assembly  (1) Hinge Upper Assembly (1) Standard 7.5" (19cm) Length Mounting Plate (6) M8 Socket Cap Bolts, (12) Washers, & (6) Nuts (1) M6 Hinge Bolt, (4) Nylon Washers, And (1) M6 Nut Optional Selections MOUNTING STYLE Track Mount - These Zinc Coated Track Nuts Are For Use With YAKIMA® or Equivalent Extruded Aluminum Track Systems  Hard Mount (Exp Nut) - This Mounting Style Uses Drilled Holes And Expansion Nuts To Affix The Mount To The Mounting Surface Hard Mount (RivNut) - This Mounting Style Uses Drilled Holes And RivNuts To Affix The Mount To The Mounting Surface - RivNuts Require A RivNut Tool To Install Which Can Be Purchased HERE No Hardware - No Mounting Hardware Is Included (Holes Are Designed For M6 or 1/4" Size Hardware)  FINISH Textured Black - A Durable Fine Textured Black Powdercoat Finish Raw - Raw Aluminum Finish With No Surface Prep *Corrosion Resistance Is Only Achieved Through A Post Applied Finish On The Raw Aluminum Components (I.E - Powdercoat Or Anodizing). Raw Finish Will Not Provide ANY Corrosion Resistance And MUST Be Coated Before Installation.