Plastic Opaque Highland Goat Horns

Sold in a set of 2, so the price you pay is for a full set. Size: 21" tall, 3" at widest point. These are very long horns, but are quite thin, keeping them down on weight. They weigh a little over 1lb as a set! (Can be anywhere from 1lb to 1.5lbs depending on the slush) These come ready to be mounted on a head by either drilling holes in the bottom and sewing, or gluing them down directly, or any of the other commonly used methods of horn attachment. (Strong magnets, screws/bolts/etc) Each set can very on weight since they are hand slushed, but most sets will be about the same. While these are very durable, if enough pressure is applied they can break. Heat can also cause warping. SOLID: These are opaque horns filled with a rigid expanding foam for extra durability. Stained horns will come with a brown paint wash on them, sealed with clear spray. In order to purchase the 'installed' options you must also purchase a resin blank at the time of buying. These horns will come with installed wood nuts in the base of the horn, and the hardware required (Bolts/washers) to attach them to a resin blank. The blank will come with holes drilled where the horns are to be installed. These will make the antlers removeable for storage and travel. HOLLOW: Are still opaque, just do not come with the rigid foam in the center. These horns are more liable to break around the edges during transport; please keep this in mind! (Keeping them hollow does not make them lighter, since we have to make them thicker to resist breakage.)