High Temp Flat Black

High Temp Flat Black   (600f-1200 F) - Specialty Silicone Based Powder Coating For High Temperature Applications     Cure Schedule = 450f/20 Min at Part Metal Temperature   Gloss Level = 0-10% On 60 Degree Meter   Recommended Mil Thickness = 1.0- 1.5 Mils.   Specific Gravity = 2.00   Theoretical Coverage = 45.0 Sq. Ft.   Salt Spray Results = 1,000+ Hours       * Do Not Use Zinc Or Iron Phosphate On Substrate Before Applying High Temp Powders     * This Product Cannot Be Second-Coated Due to the temperature sensitive nature of High Temp Powders, Overnight shipping is highly recommend, especially when outdoor temperatures are above 80F. From April 15th to October 1st, we advise against selecting ground shipping and we do not recommend shipping these on Fridays so as to prevent them from sitting over the weekend. We will attempt to hold these orders unless otherwise requested. We are not responsible for heat damage and/or product loss due to other shipping errors or delays. If you do not choose overnight shipping, and if there as any damage, you will be responsible for contacting the carrier you chose to try to file a claim.         Disclaimer: Powder Buy the Pound does not guarantee the color you see on your screen in your powder-coated jobs. Colors may vary from the actual product due to your screen resolution, viewing device and other settings outside our control. It is strongly recommended that you powder coat a sample, before applying the powder on your actual job.