High Tack Transfer Sheet

High Tack Transfer Sheet **HOW TO USE** Cut a piece of mask slightly wider than the image to cover. Remove the paper backing from the mask and set aside. Adhesive side up, place the mask down on a smooth, firm surface. With the image facing down, center it over the mask letting the middle drop down onto the adhesive, followed by the rest of the image. Place your squeegee at a 45° angle over the center of the image. Using firm pressure, push the squeegee towards the outer edge of the image. This removes any trapped air creating a bond between the image and the mask. Repeat this process in several directions. Lift a corner of the mask, use a steady motion to separate the mask from the image. Place the transferred image back on the shiny side of the original masking paper you had set aside. NOTE: You will receive ONLY ONE 6x6 or 12x12 masking sheet. You only need to purchase additional sheets if needed. With a standard htv transfer order, you receive ONE sheet per 10 transfers as the sheet can be used up to 15 times or more.