HeyDecco Primer Grip – Ready to Use

heydecco — Professional Surface Preparation Decco Primer Grip – Ready to Use Ready-to-use bonding primer formulated to improve adhesion on challenging substrates before microtoppings, mortars, and leveling compounds. Decco Primer Grip is a low-VOC synthetic resin primer formulated with bond-promoting silica aggregates. It creates a textured bonding surface to help improve adhesion and long-term performance on difficult substrates before applying mortars, microtoppings, self-leveling compounds, and other finish systems. Product Highlights Product Type Primer Synthetic resin bonding primer Formula Silica Textured aggregate bond profile Dry Time 1–2 hrs Depends on temperature and humidity VOC Low VOC Suitable for interior applications Key Benefits Superior adhesion Enhances bonding of mortars, toppings, microcement systems, and leveling compounds. Silica aggregate formula Creates a textured surface profile designed to improve mechanical bond to the next layer. Ready to use No mixing or dilution required. Apply directly from the container using a roller or brush. Low VOC A low-VOC primer option for interior surface preparation and renovation applications. Application Instructions Step 1 — Apply Apply one coat using a roller or brush, ensuring consistent and even coverage. Step 2 — Dry Allow approximately 1–2 hours to dry depending on jobsite temperature and humidity. Coverage Approximate coverage rate is 0.025 lbs per sq ft per coat. Clean Up Clean tools immediately with water after use. Pre-Application Requirements Do not dilute Use the product as supplied. Do not thin or dilute before application. Surface preparation Substrate must be clean, sound, and free of dust, grease, sealers, weak coatings, or contaminants. Surface profile A rough surface is recommended. Mechanical abrasion or etching may be required depending on substrate condition. Moisture & temperature Lightly dampen surface before application. Minimum application temperature is 40°F / 4°C. Best For Microcement Systems Helps prepare difficult substrates before decorative microcement or microtopping finishes. Self-Leveling Compounds Improves bond before applying leveling products over prepared surfaces. Tile Over Tile Creates a textured bonding surface when installing over approved existing tile substrates. Challenging Substrates Designed for surfaces where standard adhesion may be difficult without proper priming. Video Downloads Primer Grip Data Sheet PDF — technical data, application instructions, preparation requirements, and product details Primer Grip is a critical preparation step for improving adhesion on difficult surfaces. Proper substrate preparation and priming help support long-lasting system performance. Always confirm substrate suitability before installation. Do not apply over contaminated, unsound, sealed, or improperly prepared surfaces.