HDZero Whoop V2 Bundle

HDZero Whoop V2 Bundle Whoop V2 VTX Specifications   Feature Whoop V2 VTX Whoop Lite VTX Comparison Supported Cameras All HDZero MIPI cams   Video Resolution 720p60 / 540p90 / 1080p30   RF Power Output 25 mW / 200 mW   Frequency Range 5.725 – 5.850 GHz   RF Connector Secured U.FL with brass bar Standard U.FL (no retention bar) Video Connector MIPI   Durability / PCB Thicker PCB for impact resistance Thinner PCB – more prone to damage Wiring / Install Pre-soldered wire harness Manual soldering required Size 31 × 31 mm (29 × 29 inner) 32.5 × 32.5 mm (29 × 29 inner) Mounting Pattern 25.5 × 25.5 mm (M2)   Weight 5.4 g (5.1 g w/o wires) 4.9 g (4.6 g w/o wires) Board Thickness ~1.6 mm ~1.2 mm (no shielding) Power Input 3 – 12.6 V (1S – 3S)   Power Consumption 5 – 6 W   Control / OSD MSP OSD / Smart Audio   Recommended Use 80 mm whoops – 4″ micro drones 65 – 85 mm whoops Mounting Hardware M2 grommets + brass bar included M2 grommets only Antenna Included Not included   Alternative for Ultralight Builds HDZero AIO (FC + VTX, AHD interface)     Nano V3 Camera Specification:   Size:                               14x16x14mm Weight:                    2.2gram Sensor:     0.5 inch, up to 10650 mV/Lux-sec     Ultra-high sensitive CMOS sensor FOV:     FOV D:155° H:126° V:94°   Includes   HDZero Whoop V2 VTX * 1; HDZero Nano V3 Camera * 1; Dipole Antenna * 1; 40mm Mipi Cable * 1； Rubber Grommet (M3 to M2) * 4; u.FL Antenna Retention Screws * 3; Metal bar * 1