HC&D Lower Control Arm Kit

We designed this A arm kit to eliminate the strut mounting pin/uniball misalignment binding issues with better a arm cup alignment.   We use a larger diameter tube and larger shank on the rod end making this kit suitable for any tube chassis race car application to include short travel, long travel, and drag n drive cars.   Specs: All 4130 construction 1/4" mounting tab 1" x .058 tubes COM10 Uniball (5/8" bore hole) RSMX8-10T premium rod ends Uniball cup has a 12 degree king pin angle and 10 degrees of positive caster built in AN hardware Universal kit will work well with most modern style struts TIG / Jig welded Kit includes: 2ea (1xLH, 1xRH) 1 x .058 4130 tube 16" long with uniball cup and tab welded on 2ea 1 x .058 4130 tube 16" long 4ea RH threaded tube adpaters 2ea slot clevis 4ea RSMX8-10T premium rod ends 2ea COM10T Uniballs 2ea Snap rings 2ea AN Bolts, NAS Washers, GR8 Nuts Requires Welding Step down / high misalignement spacers are typically included with the struts when purchased. Some applications will require these.