Hawk Enterprises CLAW20 20-Inch Diamond Floor-Prep Tool Driver

CLAW20 magnetic tool mounting for floor preparation The Hawk Enterprises CLAW20 is a diamond tool driver for grinding and polishing natural stone and concrete with severe-duty 1.5 HP rotary floor machines. The nominal 20-inch model has a specified plate size of 19-5/8 inches and weighs 39 lb. Retain Tooling and Simplify Changes The CLAW20 uses Mag-Lok magnets to hold grinding and polishing tools in recessed mounting locations. Industrial magnets hold tools in milled recesses. You can change tooling without shop tools. The plate has six positions for 3-inch round tools and six positions for trapezoid tools. Six round blanks and six trapezoid blanks are included. Neoprene damping isolators reduce vibration in the mounting assembly. Check the CLAW20 replacement specifications The CLAW20 is listed at 165 RPM and has a milled aluminum clutch plate. When reordering, check the part number and specified 19-5/8-inch plate size as well as the nominal 20-inch designation. The driver itself weighs 39 lb. Specifications Part Number CLAW10 CLAW13 CLAW15 CLAW17 CLAW20 Claw Size 10" 12-5/8" 14 5/8" 16-5/8" 19-5/8" Claw Speed 165 RPM 165 RPM 165 RPM 165 RPM 165 RPM 3" Round Tools 3 3 3 6 6 3" Round Blanks (included) 3 3 3 6 6 Trapezoid Tools 0 3 3 6 6 Trapezoid Blanks (included) 0 3 3 6 6 Weight 11 lbs. 18 lbs. 25 lbs. 27 lbs. 39 lbs. Tool Mounting Mag-Lok industrial Magnet System Carton Dimensions 24 × 22 × 6 in Part Number CLAW20 Documents CLAW20 Specification Sheet (PDF)