Hawk Enterprises CLAW13 13-Inch Diamond Floor-Prep Tool Driver

CLAW13 Mag-Lok mounting for floor-prep tooling The Hawk Enterprises CLAW13 is a diamond tool driver for grinding and polishing natural stone and concrete with severe-duty 1.5 HP rotary floor machines. Sold as the 13-inch model, it has a specified plate size of 12-5/8 inches and weighs 18 lb. Secure Tooling with Tool-Free Changes Magnets hold the tools in recessed mounting locations. Neoprene isolators damp vibration during use. Mag-Lok magnets hold grinding and polishing tools in milled plate recesses. Tool changes require no shop tools. The mounting system has neoprene isolators and a milled aluminum clutch plate. The plate has three positions for each tool format: round and trapezoid. Three 3-inch round blanks and three trapezoid blanks are included. Check the CLAW13 plate size and speed The nominal 13-inch designation differs from the specified 12-5/8-inch plate size. The CLAW13 is listed at 165 RPM and accepts 3-inch round tools as well as trapezoid tools. When ordering a replacement, check the part number and tooling layout against your existing setup. Specifications Part Number CLAW10 CLAW13 CLAW15 CLAW17 CLAW20 Claw Size 10" 12-5/8" 14 5/8" 16-5/8" 19-5/8" Claw Speed 165 RPM 165 RPM 165 RPM 165 RPM 165 RPM 3" Round Tools 3 3 3 6 6 3" Round Blanks (included) 3 3 3 6 6 Trapezoid Tools 0 3 3 6 6 Trapezoid Blanks (included) 0 3 3 6 6 Weight 11 lbs. 18 lbs. 25 lbs. 27 lbs. 39 lbs. Tool Mounting Mag-Lok industrial Magnet System Carton Dimensions 16 × 17 × 4 in Part Number CLAW13 Documents CLAW13 Specification Sheet (PDF)