Harden Fast Activator – 8 fl. oz. – GIFT

Instructions Dip Powder Application Steps 1. Apply a thin coat of PH Plus Bonder. 2. Apply a thin layer of either Thin Resin or Medium Resin. Ensure you carefully wipe away any resin that gets on your clients skin. 3. With the lid still secured, shake the Powder jar to fluff the powder. 4. Create a protective base layer using Adv Gel Clear Powder to prevent any pigment staining on the nail bed. Dip the wet nail directly into the freshly fluffed dip powder. 5. Gently tap the bottom of the finger to remove any excess powder. Repeat this process on all nails. Then, use a fluffy brush to wipe off any excess powder from the nails and surrounding skin. 6. Repeat steps 2-4 with your desired colored powder 2-3 times until you achieve the desired coverage. 7. Once the color is applied, use a small amount of Harden Fast Dip Activator over the top of the powder. Apply thin layer to nail. Can be applied with brush or sprayer. 8. Buff and file the nails to your desired shape and length. 9. Apply a thin, smooth layer of Medium Resin or Thick Dip Resin. Allow it to air dry naturally, without using the activator. This should take approximately 4-5 minutes to cure, resulting in a shiny finish. 10. To finish, moisturize hands with Massage Butter, wipe down the nails with a lint-free wipe, and apply Cuticle Oil to nourish the cuticles and nail bed. Pro Tips Be sure activator is completely dry before applying topcoat. If you dont wait long enough, the activator will glue the bristles of the topcoat together thus ruining the brush. Use in a well ventilated space.