Half Power Rack With Cable Machine Lateral Pull Down / Rower

Go into 🦁 beast mode with the SMAI Half Power Rack with Plate Loaded Lateral Pull Down/Rower. This rack takes no prisoners - are you ready for it?  Look no further then our latest Half Power Rack. Shipping with a full range of accessories, this is the most complete half power rack / cable machine hybrid on the market. We've created this configuration to be a one-stop training solution that is unbeatable in value. No other rack comes close to giving you this much!  OK - There is a lot to take in here, so lets break it down.  Weightlifting Half Power Rack, with an integrated Lateral Pull Down & Rower Cable system At its core, the rack is a weightlifting half power rack. A super stable footprint 14 gauge 2x2 inch steel tube with tough black powder coating and precision laser cut accessory holes. Ready to support your weightlifting workouts straight out of the box.  The cable system is plate loaded, with support for any Olympic spec weight plates - we recommend using Bumper plates like SMAI HD Bumper Plates. The cable system uses an intelligent cable routing design to provide a plate loaded for both the lateral pull-down bar and the seated rower. This means you can load once, and swap between the pull-down bar and row bar without lifting a finger.   Let's review the accessories Multi-Grip Chin-Up Bar The cross beam features an integrated multi-grip chip up bar, with 5 unique grip options to challenge your pull-ups and chin-ups in different ways. We have a wide, angled grip, large cannon ball grip, straight grip, small cannon ball grip, and finally an inward-facing reverse chin up grip.   Monolift Attachment A pair of monolift arms are included - perfect for powerlifters and heavy loads, the Monolift lets you setup and prepare your lift safely, and is ready to rack your bar again as soon as you push off by swinging out to meet you at your lifting position.  Height is adjustable via a quick-release system, so you can lower for bench press or raise back up for squats and lifts.  J-Cups A pair of J-Hooks are supplied, to safely rack your loaded bar between lifts and sessions. Featuring a nylon bumper with protects your bar from scratches. Again, a quick release system allows you to remove or adjust the height in seconds.  Dip Station A pair of dipping arms attach to each upright, each arm featuring two handles allowing for a range of grips while performing dips. Height adjustable to suit all heights and workouts.  Safety Spotter Arms A pair of safety spotter arms rounds out the weightlifting accessories. These are invaluable in situations when you are solo training and want to push your limits whilst maintaining safety, the spotter arms can be adjusted to height to catch your bar in case you get into trouble. Top surface is lined in nylon to ensure your barbells are protected. Landmine Trainer The landmine trainer or barbell sleeve is a simple attachment that makes your barbell multi-use - simply slip a barbell into the sleeve and you can perform core workouts which you can progressively load with additional bumper plates on the barbell.   Knee Pad Leg Stabilizer Adjustable height knee pad/leg stabilizer - useful for when performing seated lateral pull-downs to lock your legs into position.  Bumper Plate Storage & Barbell Storage A pair of Storage Horns for bumper plates are fixed to the lower rear of the rack, within easy reach of the cable loading horns, while each upright features a barbell hanger to store 2 x barbells.  Specifications Material: 14 gauge 2x2 inch steel tube Height - 7.5ft / 90in / 229cm Width - 4ft / 48in / 126cm Depth - 5ft / 60in / 152cm Total weight: 307.545lb Distance between uprights - 42in / 107cm Uprights - 2.4in / 6cm (w) x 2.4in / 6cm (d) x 86in / 219cm (h) x 3mm (tube thickness) Upright laser cut accessory holes 20mm diameter, 10 laser cut height position indicator numbers Monolift - clearance from Uprights when extended - 14in / 35cm Dip Horns - Each handle 9.5in / 24cm length, positioned at 6in / 15cm & 10in / 25cm from upright Spotting Arms - Arm surface 13in / 35cm x 2.75in / 7cm Chin Up Bar - Cannon Ball Grips Large 3.54in / 9cm diameter Small 2.36in / 6cm Diameter. Angled grip 6.69in / 17cm long Lateral Pull Down Bar - 38.2in / 97cm length Row Handle - 14.2in / 36cm Knee Pad Leg Stabilizer - Adjustable height knee pad/leg stabilizer. Useful for when performing seated lateral pull-downs to lock your legs into position. Plate Horn Storage - 8in / 20cm Capacity