GUNPRIMER CUSTOM GUIDE CG-T (Transparent)

Recommended to prevent a failure in engraving! THIN GUIDE TAPE SHEET WITH FREE-CUT TYPE SCALE. GUNPRIMER panel line Custom guides (includes 1 sheet) Size: about 105x175mm Linear colors: ·Black ·Grey A thin, free-cut guide tape sheet with a scale of 1mm. It is convenient to attach it to parts, write a stripe-cut design on top of it with a mechanical pen, then paste various guide tapes onto top to engrave stripes and create multiple original panel lines of matching sizes. Since the guide tape can be attached to an accurate position and the work for directly engraving the stripe from above using a needle or the like can be performed, the failure of the engraving can be prevented. ■Set Contents (1) Custom guides (one sheet) Transparency: ruled line black ■Recommended for dark-colored parts. (2) Custom guides (one sheet) Transparency: ruled gray ■Recommended for brightly colored parts. It is very thin and allows you to work directly by pasting it on parts as the basis of the engraving work, writing a engraving design on it, and then stretching a guide tape over it.   ※Please do the work without putting any effort into engraving by pasting the guide above.If you put too much effort into it, the custom guide may deviate and you may not be able to work correctly. ※ Please take off the oil and dust on the surface to be pasted before pasting.Also, be careful not to touch the adhesive surface as much as possible when you touch it with your fingertips. *For engraving, we recommend using it in combination with various other engraving tools. https://youtu.be/usFaKGHGQYI