
$99.95
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
Monitor and regulate solar input for 12V batteries with the 20 Amp Charge Controller. Designed to integrate seamlessly with Goal Zero solar panels, the charge controller comes with a pre-installed High Power Port and an easy-to-read LED screen. Equipped with an IP65 rating, the charge controller is weather resistant and dustproof, allowing for protection against the elements when powering off-grid adventures or outdoor equipment. 20 AMP CHARGE CONTROLLER Designed to monitor and regulate solar input for 12V batteries. For solar charging with 100 watts and below, we recommend the 10 Amp Charge Controller. For solar charging with more than 100 watts, we recommend the 20 Amp Charge Controller. Charge Controller comes with an integrated High Power Port for connecting to Goal Zero Boulder 200 solar panels. To connect and charge a 12V battery, you must purchase the Spade to SAE Cable and additional cable adaptors. We recommend either the SAE to Ring Terminal or SAE to Alligator Clip Will not work with Yeti X Power Supply PORTS Input/Output terminal: M5 terminals Solar Input Port (High Power Port): 14-23V, up to 20A Fuse: 25A replaceable BATTERY DETAILS Charge Controller: PWM Rated solar panel amps GZ-10: 20A Normal input solar cell array voltage: 15-22V Max solar cell array voltage (output has no load): 25V Lowest operating voltage at solar or battery side: 8V Minimum Charging Characteristics: Start Voltage at 25°C: 3-10V Charge Voltage at 25°C: LTO battery: 14.0V Gel battery: 14.1V LiFePO4 battery: 14.4V Charge Voltage at 25°C: AGM battery-14.4V WET battery: 14.7V Calcium battery: 14.9V Equalizing Voltage at 25°C: WET or Calcium battery-15.5V Float Voltage at 25°C: Gel, AGM, WET, Calcium batteries-13.6V LTO and LiFePO4 batteries-13.4V Battery temperature compensation coefficient: -24mV/°C GENERAL Product SKU: 96110 Weight: 17.6oz (499g) Dimensions: 6.10 x 3.90 x 1.02in (15.5 x 9.91 x 2.6cm) IP Grade: IP65 Spade to HPP Cable Length: 3ft Operating temperature: -25 to 50°C/ -13 to 122°F Warranty: 12 Months Certs: IC, FCC, CE-EMC, CE-LVD
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2025
$99.95