Glass Railing Round Surface Mount Post

The Glass Railing Round Surface Mount Post with Round Glass Clamps is part of Inline Design’s Virginia Round Style Glass Railing System. This version is designed for clean clamp-mounted glass railing installations where top rail mounting hardware is not required. Built from a 1.67" / 42.4 mm outside-diameter round stainless steel profile with a 12 gauge / 0.102" / 2.6 mm wall thickness, this post is a heavy-duty option for modern glass railing systems that need strong post construction, a softer round profile, and matching round glass clamps. Use it for balconies, decks, porches, patios, stairs, landings, terraces, indoor railings, outdoor railings, wet or dry locations, residential projects, and commercial projects when installed according to local code, approved mounting conditions, glass requirements, and project-specific engineering. Glass panels are purchased separately. This post system is designed for use with compatible tempered or laminated glass panels. Verify glass thickness, panel height, panel width, local code requirements, and project-specific engineering before ordering glass. Compatible Glass Warehouse glass panels at Home Depot Quick Product Highlights No Top Rail Hardware Designed for clamp-mounted glass railing layouts without a handrail bracket or top rail support mounted on top of the post Heavy-Duty Round Post 1.67" / 42.4 mm outside diameter with 12 gauge / 2.6 mm wall thickness Glass Clamp System Includes round glass clamps based on selected post type: end, middle, corner, or stair configuration Finish Options 316 Satin Stainless Steel and Black Matte Powder Coat options Glass Compatibility For 3/8", 1/2", or 9/16" tempered or laminated glass Important Glass panels and base anchors are not included Project Gallery Images Gallery Richmond, VA Dayton, OH Bremerton, WA Redding, CA Details System Virginia Round Style Glass Railing System Top Rail Hardware Not included with this version Profile Size 1.67" / 42.4 mm outside diameter round post Post Thickness 12 gauge / 0.102" / 2.6 mm heavy-wall construction Glass Thickness 3/8", 1/2", or 9/16" tempered or laminated glass Satin Stainless Steel AISI 316 stainless steel for wet, dry, indoor, outdoor, and coastal environments with routine stainless steel maintenance Black Matte Powder Coat Black Matte powder coat over AISI 304 stainless steel Finish Standard ASTM A480 No. 4 linearly textured satin finish for satin stainless steel options Post Preparation Pre-drilled and tapped M8 x 1.25 mm for round glass clamps Construction Heavy-duty construction, sturdy upon completion, and designed for straightforward installation Installation Surface mount installation to approved concrete, steel, wood blocking, or other structural substrates using project-specific anchors Available Configurations Heights 36" and 42" Post Types End, Middle, Corner, Stair Lower, Stair Middle, and Stair Upper Finish Options 316 Satin Stainless Steel; Black Matte Powder Coat Post Only; Black Matte Powder Coat Post & Base Cover; Black Matte Powder Coat Post, Base Cover & Glass Clamps What Is Included in the Kit? Post (1) round surface mount post, pre-drilled and tapped M8 x 1.25 mm Round End Cap (1) included Round Base Cover (1) included Round Glass Clamps (4) for Middle or Corner Post, or (2) for End Post and applicable stair configurations Included with every clamp: Each glass clamp includes its own M8 × 1.25 mounting bolt for attaching the clamp to the post. Important Installation Notes Glass panels are not included. Glass must be provided by a local vendor. Base anchors are not included. Due to the variety of floor surfaces, customers must supply the appropriate connecting hardware for the base, including screws, bolts, anchor bolts, or other project-specific fasteners. For substrate-specific fastener guidance and recommended approaches, see Anchoring Options for Railing Posts. Anchor selection must be based on the mounting surface, including concrete, steel, wood framing, blocking, or other approved structural substrates. Stair posts and other custom posts require an additional fee to account for custom post fabrication and CAD drawings specific to the customer field measurements when necessary. Custom fabrication requires a minimum of 1–2 weeks for production. Guardrail height, glass type, post spacing, anchoring, and other structural requirements must be verified against local code and project-specific engineering. For coastal or high-corrosion environments, stainless steel must be cleaned and maintained regularly. Links & Downloadable Materials Post Placement Guide & Engineering Specs Modular Railing System Posts Detailed Drawings Installation PDF Installation YouTube Video Virginia Round Drawings Stair Installation Stair Details Stair Post Placement Mounting Options Anchoring Options for Railing Posts More Information More Info on Handrail Height Requirements More Information on AISI 316 (Satin SS) and AISI 304 (Black Matte PC) Stainless Steel