Power Unit for Residential Mats

Every HeatTrak System requires at least one Power Unit. This outdoor-safe unit comes with 6' of cord and contains an inline Ground Fault Circuit Interrupter (GFCI) to safely connect your home’s exterior outlet to your system of connected mats.  For Stair and Walkway Mats Systems, order one Power Unit (HR-P) for every location of mats and for every configuration of mats up to 13-amps. Power Units are included with Entrance, Mobility Ramps and Driveway Mats and do not need to be ordered separately. Features Resources Put snow removal convenience at your fingertips with a HeatTrak Snow & Ice Melting Driveway Mat. Driveway mats are reliable, durable and ready the moment the storm hits to melt 2" (5 cm) of snow per hour. HeatTrak Snow & Power Unit features include: 6' (183 cm) cord Engineered to be left outdoors all season long Built-in Ground Fault Circuit Interrupter (GFCI) Light Tester included Powers up to 13-amps of Snow Mat Melting Mats 2-year manufacturer's warranty How to Calculate Power Units Needed Full Size Mats Half Size Mats Stair Mats 20"x60", 2.5-amps 20"x30", 1.2-amps 10"x30", 0.7-amps 30"x60", 3.5-amps 30"x30", 1.7-amps 10"x48", 1.0-amps 10"x60", 1.3-amps Using the chart above, add together the amps used for each mat. Divide this number by 13 and round up to the next whole number.This is the number of Power Units (HR-P) and circuits you will need to power your configuration. No more than 13-amps should be on any one circuit. HeatTrak mats are for snow melting only. Never cover mats. Do not use indoors. Do not use inside pet houses or enclosures. Residential Mats can only connect to Residential Mats. They do not connect to Industrial Products. HeatTrak Driveway Mats do not connect to other HeatTrak Residential Mats, HeatTrak PRO Mats or other snow Melting Systems. HeatTrak Driveway Mats and HeatTrak PRO mats are durable enough to be driven on.