GEPRC MARK5 O4 Pro FPV Drone (DC Frame, Emerald Green)

GEPRC MARK5 O4 Pro DC FPV Drone（emerald green） Note: Pre-order is open now. Estimated arrival date: Early September.   The GEPRC MARK5 O4 Pro FPV Drone (DC Version, Emerald Green) is a premium 5-inch freestyle quad specifically designed for compatibility with the DJI O4 Air Unit Pro. Engineered for ultra-smooth footage, low-latency HD video transmission, and rock-solid flight performance, this drone is ideal for cinematic pilots and freestyle enthusiasts alike. Featuring a newly designed aluminum camera mount with molded silicone damping, the GEPRC MARK5 O4 Pro FPV Drone minimizes vibration and resonance for ultra-clear video capture. Its powerful TAKER F722 BT 32-bit flight controller paired with a 50A BLHeli_32 ESC delivers smooth and responsive control, while SPEEDX2 2107.5 1960KV motors provide punchy, reliable power on 6S LiPo. The DC frame’s wider wheelbase improves stability and reduces prop-in-view for cleaner footage. Quick-swap arms and a neatly integrated capacitor/buzzer compartment make maintenance simple. With Bluetooth tuning support and up to 8 minutes of cruising flight time, this drone is ready for advanced cinematic flying or ripping freestyle lines right out of the box. Key Features: DJI O4 Air Unit Pro w/ 1080p 100fps video & 4K 120fps recording DC frame layout for stability and prop-free video TAKER F722 BT 32-bit FC with built-in Bluetooth tuning SPEEDX2 2107.5 1960KV motors + 50A BLHeli_32 ESC Molded silicone vibration damping + aluminum camera mount Quick-release arms with 2-screw design for easy swaps Compatible with ELRS 2.4G, TBS NanoRX, and optional GPS Emerald green 3D printed accessories for a sleek look Specifications Wide X Version  Model: MARK5 O4 Pro Wide X FPV Wheelbase: 225mm VTX: DJI O4 Air Unit Pro VTX module Camera: DJI O4 Air Unit Pro camera module Antenna: DJI O4 Air Unit Pro Antenna Motor: SPEEDX2 2107.5 1960KV Prop: Gemfan 5136 FC: GEP-F722-BT-HD V3 MCU: STM32F722 IMU: ICM42688-P(SPI) OSD: BetaFlight OSD w / AT7456E chip ESC: GEP-BL32 50A 96K 4IN1 ESC Power Connector: XT60H-M Receiver: PNP /  ELRS 2.4G / TBS NanoRX Recommended Battery: LiPo 6S 1050mAh-1550mAh Printouts Color: emerald green Weight: 414g ± 5g Flight Time: 6-8 minutes（Based on slow cruising tests, the actual may vary due to product differences, firmware version, flying style, and environment. For reference only） DC Version  Model: MARK5 O4 Pro DC FPV Wheelbase: 230mm VTX: DJI O4 Air Unit Pro VTX module Camera: DJI O4 Air Unit Pro camera module Antenna: DJI O4 Air Unit Pro Antenna Motor: SPEEDX2 2107.5 1960KV Prop: Gemfan 5136 FC: GEP-F722-BT-HD V3 MCU: STM32F722 IMU: ICM42688-P(SPI) OSD: BetaFlight OSD w / AT7456E chip ESC: GEP-BL32 50A 96K 4IN1 ESC Power Connector: XT60EW-M Optional GPS：GEP-M10 GPS Receiver: PNP / ELRS 2.4G / TBS NanoRX Recommended battery: LiPo 6S 1050mAh-1550mAh Printouts Color: emerald green Weight: 433.4g ± 5g Flight Time: 6-8 minutes（Based on slow cruising tests, the actual may vary due to product differences, firmware version, flying style, and environment. For reference only） Includes 1 x GEPRC MARK5 O4 Pro FPV 1 x Gemfan 5136（2CW 2CCW） 1 x 15*250mm strap 2 x 20*250mm straps 2 x Battery anti-slip pads 1 x 3D printouts pack 1 x Spare screw pack 1 x L-shaped screwdriver 1.5mm 1 x L-shaped screwdriver 2mm 1 x L-shaped screwdriver 3mm 1 x M8 wrench Spare Screws Included: 1 x M5 Flange Nylon Knurled Nut 2 x M2 Stainless Steel Press-fit Nuts 1 x M5*25 Stainless Steel Button Head Hex Screw 4 x M3*10 Button Head Hex Screws 4 x M3*8 Button Head Hex Screws 2 x M3*8 Countersunk Hex Screws 2 x M3*5 Countersunk Hex Screws