General Purpose Laminating Resin

What Is #78 General Purpose Laminating Resin? #78 General Purpose Laminating Resin is a polyester laminating resin for hand lay-up and spray-up, designed for part fabrication and building low-cost molds. #78 General Purpose Laminating Resin delivers robust processing and outstanding physical properties, and as a first quality resin its color, consistency, and properties will not vary from batch to batch. It is formulated for low HAPS, which suits operations with emissions requirements. Why Choose #78 General Purpose Laminating Resin? The defining trait of #78 General Purpose Laminating Resin is that it is wax free, so there is no need to sand between coats when laminating multiple layers. That same wax-free chemistry means air must be inhibited during the cure cycle for repairs and for single or thin layer applications: without inhibiting air, the resin may not fully cure and can remain tacky. For thick or multiple-layer applications, the heat generated during the exotherm allows the resin to cure fully on its own. What Are the Best Applications for #78 General Purpose Laminating Resin? #78 General Purpose Laminating Resin is well suited to general part fabrication, hand lay-up and spray-up laminating, and building low-cost molds. It is the economical, everyday polyester laminating resin. For higher strength and chemical or service-temperature demands, #90 Isophthalic Polyester Resin is the step up. How Should #78 General Purpose Laminating Resin Be Used for Best Results? #78 General Purpose Laminating Resin is catalyzed at 1.25% MEKP and applied by hand lay-up or spray-up. For repairs and single or thin coats, inhibit air by adding #71 Styrene Wax to the resin or spraying the applied resin with a coat of #13 PVA so it cures tack free. For thick or multi-layer layups, the exotherm cures the resin fully without an air inhibitor. Technical Specifications Type: Wax-free general purpose polyester laminating resin, low HAPS Catalyzation: 1.25% MEKP Cure note: Inhibit air with #71 Styrene Wax or #13 PVA for repairs and thin or single layers Process: Hand lay-up and spray-up Available Sizes and SKUs #78-F — Quart #78-A — Gallon #78-B — 5-gallon pail #78-DRUM — Drum #78/69-F — Quart with hardener (1 qt resin, 1 x #69) #78/69-A — Gallon with hardener (1 gal resin, 2 x #69) #78/69-AK — Case with hardener (4 gal resin, 8 x #69) Quantity discounts available on the 5-gallon pail when 4 or more are ordered. Every product Fibre Glast sells is First Quality Guaranteed, so you can laminate and build molds with confidence.