
$28.50
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
General Finishes High Performance Water-Based Topcoat, Flat, Pint is a clear interior wood finish. This pint can covers about 65 to 75 sq ft per coat. Flat gives a low, natural look with very little shine. General Finishes High Performance Water-Based Topcoat protects interior wood with a clear finish. Apply it by brush, roller or sprayer, and choose the sheen that suits your project. Features Resists water and household chemicals on cabinets, furniture and trim Dry to the touch in 30 minutes or more; wait at least 2 hours before recoating Water-based, with soap-and-water cleanup Five sheens: Dead Flat, Flat, Satin, Semi-Gloss and Gloss Goes over raw wood, sealed finishes that pass an adhesion test, and oil-based finishes dried 72 hours Best for Interior furniture, cabinets, doors, trim and millwork, on raw wood or over a finish that passes an adhesion test. It is an interior product; for outdoor wood, use an exterior finish. Specs Base Water-based polyurethane Use Interior Sheens Dead Flat, Flat, Satin, Semi-Gloss, Gloss Coverage Pint 65 to 75 sq ft; quart 125 to 150 sq ft; gallon 500 to 600 sq ft Dry to touch 30 minutes or more Recoat 2 hours or more Full cure 21 days Coats 2 to 3 Apply with Brush, roller or sprayer Thinning Distilled water, 5% to 10% if needed Cleanup Soap and water Manufacturer part # PTHF VOC Under 175 g/L How to apply Sand raw wood smooth. On a finished piece, clean, scuff sand and test adhesion in a hidden spot. Stir well. For hand application, lay on a liberal wet coat along the grain. Use smooth strokes without pressure or repeated back-brushing. Allow at least 2 hours at 70 °F and 50% humidity. Cool or humid conditions, thick coats and sealed surfaces need longer. Sand lightly only when the finish powders, then recoat. Apply 2 to 3 coats. For spraying, strain first and apply a 3 to 5 mil wet film. Check the tip with your equipment supplier; use the recommended NIOSH/MSHA-approved respirator and ventilation. Treat it gently during the 21-day cure under ideal conditions. Good to know Do not apply over white or light paint: General Finishes warns of yellowing. Do not use over linseed oil or Danish oil. Over oil-based stain or finish, let it dry at least 72 hours first. Do not mix Dead Flat with the other sheens. Warning: may cause an allergic skin reaction. Wear gloves and read the safety data sheet. Questions What is the difference between dry time and cure time? Touch-dry and recoat are separate stages. The listed times assume 70 °F and 50% humidity; full cure takes about 21 days. Wait longer when drying conditions differ. How much do I need? Multiply the area by the number of coats, then divide by the coverage for your can size. Allow for waste and absorbent wood. Can I use it outdoors? No. It is made for interior surfaces. Which sheen should I pick? Dead Flat and Flat have the least shine. Satin is in the middle; Semi-Gloss and Gloss are progressively shinier. Do not mix Dead Flat with another sheen.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2026
$28.50