Gen5 VD Veer Haldex Controller

Haldex Performance Controller is a must for enthusiasts to have full control of the Haldex 4Motion system. Used in Dragrace, Track, Cirquit, Street and Daily driving. The Haldex Controller can be used in original 4Motion car with a plug and play solution or run the Haldex in a standalone solution in any car from a Golf MK1 to newest cars. The standalone solution does not need any other sensors like the ABS All controls will be done with the Haldex Controller Bluetooth App. Switching driving modes, creating Maps and viewing Haldex data. The system is fully plug and play for all Haldex models. No need to change or replace parts of the Haldex so the Haldex Controller can be removed just as easy and installed in another car. Almost all VAG Haldex systems are supported Gen1, Gen2, Gen4, Gen5 0AY, Gen5 0CQ. User defined characteristics with different operating modes: Haldex Off Stock mode Lock Haldex 100/0 to 50/50 Map based on Throttle signal Map based on Speed signal Map based on Boost signal Map based on Throttle and Speed signal Lots of overall options: Startup mode last used or fixed mode Haldex disengage on handbrake Haldex disengage on Brake Brake ignore And more! The Haldex Controller comes with a control unit a solid and waterproof housing that can be placed inside the trunk or outside the car if needed. Wiring loom set inline plug and play for all original 4Motion cars or a standalone wiring set that has long wires to connect all manually when there is no connection available. The App is free and available in the App store. The App will show live information about the Haldex system like how much torque is transmitted to the rear wheels. The App interface is also used to change all settings in the controller and to create Haldex configurations and maps. The Haldex Controller does not replace the existing Haldex Controller unit and can only be used with a fully working existing haldex controller. Haldex Controller modes OFF mode Turn the Haldex completely off including the pre charge pump. The car will drive like any normal 2WD car. Locked mode Lock the Haldex to a fixed value with the App no matter what the car does the Haldex will always stay at the selected power split. Can be adjusted in steps of 10%. 100/0, 90/0, 80/0, 70/30, 60/40, 50/50. 100 / 0 is 0% to the haldex unit but the pre charge pump is still active. Throttle mode The Haldex power is set by the custom configured value at a certain throttle position. Throttle position in steps of 10%. 0 – 10% 50 / 50 10 – 20% 60 / 40 20 – 30% 50 / 40 Speed mode The Haldex power is set by the custom configured value at a certain speed. Speed in steps of 20 km/h. 0 – 20 km/h 50 / 50 20 – 40 km/h 60 / 40 40 – 60 km/h 50 / 40 Boost mode The Haldex power is set by the custom configured value at a certain boost value. Boost value in steps of 250 mBar. MAP mode A more advanced mode that will use both throttle and speed input signal. Extra advanced option for steering angle. Track mode Mode for track race. this mode uses norm. throttle, steering angle and speed. fully customizable. Advanced features like brake settings and lock hold. Passthru mode The Haldex will run like stock. The App will shows the current Haldex power generated by the Haldex. Standalone functions Analog Inputs Throttle – 5V Speed – 12v Vss Boost – 5V Brake – 12V Handbrake – Ground Brake input When the brake signal is applied, the Haldex will be set to 100/0 so no torque is applied to the rear wheels. Brake Ignore is also possible. Handbrake input When the handbrake signal is applied the Haldex will be disabled including the pre charge pump. Burnouts are possible since the Haldex is completely turned off. Outputs Output2 The Controller has a RPM output for converting CAN-BUS RPM to Analog. The Haldex Controller comes with a control unit a solid and waterproof housing that can be placed inside the trunk or outside the car if needed. Wiring loom set inline plug and play for all original 4Motion cars or a standalone wiring set that has long wires to connect all manually when there is no connection available. The App is free and available in the App store. The App will show live information about the Haldex system like how much torque is transmitted to the rear wheels. The App interface is also used to change all settings in the controller and to create Haldex configurations and maps. The Haldex Controller does not replace the existing Haldex Controller unit and can only be used with a fully working existing haldex controller. We are not responsible for the use or misuse of this product, all support inquiries must be addressed through the original brand HQ directly, Mabotech labs is not responsible for any damage incurred related or not to the use of this product.