Gen-Y Mega-Duty 10K Drop Hitch 2" Receiver (7.5" Drop Offset)

Fits: 2" Receivers Gen-Y's drop hitches are available in many different sizes to accommodate stock or lifted trucks. Adjust the desired height by simply pulling a pin and moving the ball mount to that position. With so many different sizes and adjustments, you can dial in that optimal height for a smoother and safer haul. You can even use one of the available top positions to mount other accessories like a bike rack without having to worry about removing the hitch. It is a great choice for any stock height or lifted trucks with a standard 2″ ball mount receiver. All Gen-Y products are rigorously tested and exceed the SAE-J684 Weight Testing Requirements. Never exceed recommended capacity on any trailer tow coupling or vehicle receiver hitch. Lifetime Guarantee and Made in the USA. What Size Drop Hitch do I need? This is typically the big question and can vary depending on your trailer. Ideally, you want your trailer to sit behind your vehicle as level as possible when connected. The easiest way to figure this out is to measure the difference from the bottom of the trailer tongue (level) to the inside bottom of your hitch. The difference is the approximate drop you should try to get close to. If you are not sure of your trailer height, then 15-17" off the ground is an average height for most trailers to use. Again, measure tow vehicles hitch opening. Then the appropriate drop is the difference between that and approximately 16". Example, your vehicle measures 19.5", then go with a 4" drop, that get you close to the middle between 15"-17". Do you have a lift kit on your truck? No worries – our hitch is still compatible! However, there are important considerations when towing with a lifted vehicle.For instance, extended drop hitches (12″ or more) can exert additional leverage on the vehicle receiver. Consequently, some receiver hitch manufacturers may decrease their ratings by up to 50% in such cases.Moreover, a long drop hitch typically introduces more movement due to its increased length and drop of the ball mount. To address this, utilizing the Stabilizer Kit (GH-0100) is recommended. This kit securely attaches the bottom of the GEN-Y adjustable drop hitch to the truck's frame, alleviating stress on the receiver and preventing movement of the ball mount, thus ensuring a safe towing experience. Features: Drop/Raise Range: 7.5" 10,000LB Towing Capacity, 1,500LB Tongue Weight Fabricated with Heavy Duty Steel Precision Milled and Drilled Easy One Pin Adjustment Works with Weight Distribution System (GH-302) Sand Blasted and Coated with a Durable Silver-Vein Powder Coat Compatible with All 2″ Attachments Includes:  Part# GH-426 - 2" Receiver, 7.5" Offset, 6 Adjustable Positions, with GH-031 Dual-Ball & GH-032 Pintle Lock