Gen 2 Ford Raptor 5link Conversion Kit

When upgrading your truck's rear suspension, don’t settle for less. SVCOFFROAD’s Gen 2 5link conversion replaces stiff, bucking leaf springs with smooth Icon Coil Springs, delivering a remarkable performance boost. Engineered for strength and straightforward design, this kit integrates with our existing bypass rack system, allowing you to install larger 3.5-inch or 4.0-inch 5-7 tube Fox, King, or Radflo bypass shocks for enhanced tuning and control—something a single coilover can’t match. Unlike coilover setups that transfer loads to the bed rack which doesn't offer near enough strength to withstand the weight of a truck, this system directs forces straight to the frame just as seen on OEM Gen 3 Raptor preventing twisting, cracking, and failure. For taking your truck’s performance higher, this kit stands unrivaled. IMPORTANT NOTE:  If you already have an SVC bypass rack setup, you can utilize your existing bed rack, plus the shocks and bump stops which dramatically reduces cost. You will also reuse your factory Gen 2 rear axle. 100% MADE IN THE USA USING USA SOURCED ALUMINUM  What You Get With The Base Price Kit: SVC 4130 Sheet Metal For The Chassis Side and Axle Side SVC 4140 Billet Axle Lower Link Mounts SVC 2.5 Weld On Bump Can SVC 4130 Shock Mount SVC 4130 Fabricated and Adjustable PanHard Bar (Reduces Side to Side Swing By 100% over Stock Bar. SVC Shock Mounts Ford OE Lower Spring Isolator Ford OE Upper Spring Isolator Ford OE Driver Lower Spring Mount Ford OE Passenger Lower Spring Mount Limit Straps Extended Brake Lines 5 Link Hardware Additional Items That Must Be Used In Order Work: SVC Billet Aluminum Upper and Lower Links SVC 4130 Fabricated Upper and Lower Links SVC Bypass Rack 18in Shock (preferred).  You Can Run a 16inch but will lose wheel travel by doing so. If You Choose To Run Factory Take Off OEM Gen 3 Upper and Lower Links, You Need To Source Those Yourself.