5" x 5/8"-11 Diamond Grinding Cup Wheel, 16 Segments

ITM's diamond grinding cup wheel is a segmented steel cup with a high diamond concentration, made for grinding concrete, brick and masonry on an angle grinder. It takes a surface down to clean, sound material: knocking off high spots and form lines, removing laitance and taking a wall back to bare concrete before a repair or a bonded product goes on. It runs wet or dry. This is the 5" wheel with a 5/8"-11 thread and 16 segments. Dust: Dry grinding concrete, brick or masonry releases respirable crystalline silica. Run a HEPA dust extractor, or grind wet, and use the controls and respiratory protection your silica exposure control plan calls for. Specifications: Diameter: 5" Arbor: 5/8"-11 thread Segments: 16 Use: Wet or dry Part number: ITM GCW-50T Sold as: Each, 1 per box Features: High diamond concentration 16 segments Wet or dry use 5/8"-11 thread, screws straight onto an angle grinder spindle Sold individually, 1 per box Applications: Grinding concrete back to a clean, bare surface Removing high spots, ridges and form lines Surface prep on concrete, brick and block walls Levelling and smoothing concrete For use on: Concrete Brick Masonry Runs in: Angle Grinder