Gardiner Micro Jet Rinse Bar

The Gardiner Micro Jet Rinse Bar can help you get better coverage while rinsing! Features: Rinse bar has 16 micro jets (10 inch) or 32 micro jets (14 inch) to provide precise but gentle rinsing Bracket fits between the brush and brush socket on any 10 or 14 inch Gardiner brush (excluding the Sill or Supreme brushes) Lightweight at 41g (10 inch) or 48g (14 inch) Provides full-coverage over-bristle micro jet rinsing Flow rate is half that of the standard micro-jet rinse-bar and about equivalent to standard pencil or Fanjets - recommended 1.5 - 2lpm Jet angle is 3° higher than standard rinsebar to allow for lower flow rates Height of jets can be adjusted Uses John Guest connections on unit Uses standard brush 3-way connector and jet hose Can be used with internal brush jets as well with the 5-way connector Needs 2 longer screws to allow it to be attached between brush body and brush socket (if used on standard brushes, will need 19mm screws; if used on Xtreme will need 16mm) Please note: The Gardiner Micro Jet Rinse Bar does not come with brush, gooseneck, or waterpole. Available in 10 or 14 inch.