Gamma IP Pixel Strip (Single Strip)

The Gamma pixel strips are very versatile and easy to install. They feature 80 pixels per meter, which is more than the typical 60 per meter that most strips have. They include 500mm waterproof input and output lead cables for easy daisy chaining. Additional cables can be purchased separately. The Gamma pixel strip driver has 4 output ports, each allowing up to 8 strips per port with a maximum cable length of 200 feet. Full pixel control is achieved over Art-Net, or alternatively, standard DMX can be used with built-in macros. From the Manufacturer: Our LED Pixel Strip IP is a pixel mapping, one-meter strip that sets up in minutes with minimal technical know-how. Each strip houses 80 tri-colored SMD 5050 LEDs, has a pixel pitch of 12.5 millimeters, and a 120-degree viewing angle. With multiple control options―industry standard Art-Net and DMX ―pixel mapping displays are achieved in minutes. Runs both signal and power over 5 pin cables with locking connectors that provide greater stability and connection in a daisy chain. IP-65 outdoor rated features also makes this a reliable setup for any type of setting no matter if its indoors or outdoors.   In the Box: (1) 1M IP Pixel Strip  Video Review: Features: Light Source: 80x SMD5050 RGB LEDs  Color: RGB Length: 1 Meter Lead Length: 500mm Control Protocol: DMX, Art-Net Operating Modes: 1LED / 2LED / 3LED / 4LED = 1 Pixel IP Grade: IP65 Resources: Manual