Galvanized Chain Link Rolling Gate

Our Galvanized Chain Link Rolling Gate is perfect for properties that need a gate that uses less space or is on any kind of slope. This gate will provide extra security to your property and has the durability and longevity of a typical chain link gate. This gate is manual ONLY; cannot be used with automatic openers. Galvanized steel Rust resistant Doesn’t need as much space as a swing or cantilever gate Rolling gates are finished 1' longer than the opening. Gate frame is made from 1-5/8" x .085 CR20 Commercial Galvanized Pipe. Barb wire adds 1 extra foot to height. THIS IS JUST THE GATE. HARDWARE AND POSTS SOLD SEPARATELY. Along with the gate, you'll need 2 runs of pipe for the gate to roll on, 2 rear wheel assemblies, Safe-T line track brackets (amount varies on gate length), and 1 double wheel assembly. Roller pipe is 4048000 - 1-5/8" x .110 x 21' CR40. You need 2 runs that are at least the length of the gate plus however long more to reach the next post (if necessary) to attach to a safe-t line track bracket. The rear wheel assembly is 10984. They attach at the end of the gate and roll on the roller pipe. Need 2, 1 for each roller pipe. You need 2 Safe-T line track brackets per post and depending on your post spacing, need to match total gate length plus extra feet to next post (if necessary). Post O.D. Part SKU # 2" 10972 2-1/2" or 3" 10979 4" 10964 Last but not least, you'll need a double wheel assembly to support the weight on the opening end and roll. The wider the assembly, the less likely it will wobble. The recommended double wheel assembly is 10983 which is an 8"-wheel, 12" wide double wheel assembly. We also have 10982 which is a 6"-wheel, 6" wide double wheel assembly.