Galaxy PSE Economical 16 Ch L Rackable Wireless Mic System

DESCRIPTION The PSE system is a UHF diversity receiver with 16 selectable channels. The multi channel microphone receiver features a volume control, channel display, Diversity Antennas and IR Sync. The PSE has an XLR 1/4" output and squelch adjustment. The PSE is available with a handheld, body pack with headset, lav, or instrument cable.  The PSER can be used and will sync with either the HH52 or MBP52 transmitters. The HH52 has a gain control and an on/off switch. Both transmitters are powered by 2 AA batteries. The MBP52 body pack transmitter has a 0/-10/Mic selector switch. 300' Range 16 Selectable UHF Frequencies Diversity Antennas Single/Dual Rack Mount Included PSER Receiver Output Volume Control IR Sync Receiver to Transmitter AF Level Indicator Active Antenna Indicator Squelch Adjustment XLR / 1/4" Outputs Detachable BNC Antennas Metal Chassis HH52 Transmitter Dynamic Microphone Element On/Off Switch IR Sync Transmitter to Receiver High/Low RF Switch 10 mW / 5 mW Metal Chassis Operates on 2 AA Batteries (up to 8 hours Alkaline) Dimensions: 9.8" x 2.1" (250 x 53 mm) (L x Dia.) Weight: 9.5 oz. (270 g) MBP52 Transmitter Low Battery Indicator 3 Position Switch IR Sync Transmitter to Receiver Mic/0/-10dB Operates on 2 AA Batteries (up to 8 hours Alkaline) Dimensions: 3.3" x 2.6" x 1" (85 x 65 x 24 mm) (HxWxD) Weight: 2.8 oz (80 g) SPECIFICATIONS PSE SYSTEM SPECS Available Frequencies 16 Frequency Ranges CODE D 584~607MHz CODE N 518~542MHz Band UHF Operating Range Under Typical Conditions 300' (92 m), actual range depends on RF signal absorption, reflection, and interference. Audio Frequency Response (+/-3 dB) 60 Hz ~ 16 kHz Total Harmonic Distortion (+/-30 kHz deviation 1 kHz tone): <1% Dynamic Range >90 dB A-weighted Operating Temperature Range 14° F to 122° F (-10° C to 50° C), battery characteristics may limit this range PSER RECEIVER Audio Output Level (+/-30 kHz deviation, 1 kHz tone) XLR Connector (into 600 Ohms load) -12 dBV 1/4" Connector (into 3 k Ohms load) -18 dBV Output Connections 1 Male XLR Balanced 1/4" Balanced Output Impedance XLR connector 200 Ohms 1/4" connector 1 k Ohms XLR Output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio + Pin 3: No Audio - Sensitivity -93 dBm for 30 dB Image Rejection >90 dB Casing Metal Chassis EIA STANDARD 1 U Dimensions 1.7" x 8.3" x 6.3" (44 x 212 x 160 mm) Weight 31 oz (880 g) Power Requirements 12-18 V DC at 300 mA, supplied by external power supply HH52 HANDHELD TRANSMITTER Max Audio Input Level 0 dBV Gain Adjust Trim Pot RF Output 10 mW, 5 mW Frequency Response 70 Hz ~ 15 kHz Dimensions 9.8" x 2.1" (250 x 53 mm) (LxDia) Weight 9.5 oz (270 g) (without batteries) Power Requirements 2 "AA" size alkaline or rechargeable batteries Battery Life About 8 hours (alkaline) MBP52 BODY PACK TRANSMITTER Max Audio Input Level 0 dBV to +10 dBV Gain Adjust Mic / 0 dB / -10 dB RF Output 10 mW Input Impedance 5 k Ohms Dimensions 3.3" x 2.6" x 1" (85 x 65 x 24 mm) (HxWxD) Weight 3.0 oz (85 g) Power Requirements 2 "AA" size alkaline or rechargeable batteries Battery Life About 8 hours (alkaline)