Galactic Ghost Red

ALWAYS TEST BEFORE FULL APPLICATION DESCRIPTION Galactic Ghost Red is a WHITE based pigment that has red hues but drastically changes color over dark bases. Ghost pigments perform differently in various applications so please look below in the drop down boxes for additional information. Are Ghost pigments the same as Interference pigments? Yes. The perform exactly the same. Want to know what a Ghost / Interference Pigment is and does? Here's one of our blogs > HERE What are the differences between Ghost, Glimmer Ghost, and Galactic Ghost? Easy answer! The colors remain the same only the size of the particles are different. Ghost Series 10-60um (microns) Glimmer Series 40-200um (microns) Galactic Series 200-800um (microns)   Our popular mica powder is ideal for DIY craft use, such as, epoxy, resin, woodworking, pen blanks, plastics, slime, watercolors, cosmetics, fishing lures, bath bombs, jewelry, melt and pour, lip balm, acrylic, polish, candle making, and MUCH more. INGREDIENTS & PARTICLE SIZE Particle size                   200-700  μm Ingredients                    Fluorphlogopite, Titanium Dioxide, Tin Dioxide Heat Threshold             1000 °F - 1832 °F ADDITIONAL DATA Product Type  Mica Vegan Yes Soaps Yes Epoxy Resin Yes Acrylic Yes FDA-Permitted for External Use Yes FDA-Permitted for Eye Area Use Yes FDA-Permitted for General (Including Lips) Use Yes FDA-Permitted for Bath Bombs Use Yes    EPOXY RATIOS Epoxy 2 grams per 8 ounces The most common question that we receive is "How much pigment per gallon of epoxy?". This is a very valid question and unfortunately there is no set answer due to the numerous types of applications and variations. This is why we recommend the 2 grams per 8 oz and add as desired. For example: Are you looking for an opaque or transparent look?  Lighter colors may take more pigment to achieve the color. Why micron sizes matter: PLEASE be aware of the micron sizes of the pigment. The larger the micron, the larger the particle. Typical pigments average 10-60um.  Be aware that larger micron sized pigments will most likely have a heavier density which will cause the pigment to sink faster in fresh epoxy such as deep pours. For example, our Icicle or 14k Nugget Gold is 200-700um and will most likely sink in fresh epoxy faster.  To alleviate sinking either let the epoxy settle up a little bit. Or, come back through your project to "stir" it a little more.   SOAPS RATIOS Soap - Cold process 2 tsp per lb of oils Soap - Hot process ½ tsp lb of MP base     AUTOMOTIVE / REMOVABLE PAINT RATIOS Peelable Automotive Coatings (Plasti Dip, HaloEFX, P1Coatings, Pro Line, Autoflex, Etc.) 50 Grams Per Gallon Standard Automotive Clears 25 Grams Per Quart Appliance Paint And Coatings 25 Grams Per Quart Architectural Coatings (Interior And Exterior) 10-20% By Weight Wall Paper And Other Architectural Paper Coatings 1-5% By Weight   IMPORTANT! - If you are spraying this pigment, we recommend spraying it over a white base BUT can be lightly sprayed over other colors for a slight hue of the ghost color. ALWAYS TEST BEFORE FULL APPLICATION! Peelable Coatings: The majority of our pigments can be sprayed through a 1.2 tip Be aware of the micron size. The larger the particle you may have to go to a larger tip. The pigments can be mixed with the base color or mixed into the clear and sprayed over the base color. The base color may impact the overall color of the pigment. Light colored pigments yellows, pinks, etc., we recommend using a white base or a like colored base.  Dark colored pigments, we recommend using a black or dark colored base Automotive Paint: The majority of our pigments can and have been used for automotive. The majority of our pigments can be sprayed through a 1.2 tip Three ways to use our pigments for spraying: Mix directly into the base color to create a unique blend Mix and spray with your mid clear over the base color Mix and spray with your top coat. Typically we do not recommend this due to the possibilities of striping. Also, we use the top coat as a UV protector or possible sanding of the top coat, etc. ACRYLIC POURING RATIOS  ALL MEASUREMENTS BY VOLUME Courtesy from our friend Justin Salley. For more tutorial visit his Youtube page HERE. Our Ghost pigments look stunning in acrylic pours! STEP #1- MIX YOUR POURING MEDIUM 3 parts Behr8300 Deep Base Interior/Exterior Hi-Gloss Enamel.  1 part JOSONJA Polyurethane Water Based Gloss Varnish. Mix gently folding paint and varnish together until they are completely mixed, Go Slow to reduce mixing bubbles. STEP #2- DISPERSING PIGMENTS INTO YOUR MEDIUM Pour 1/2 to 1 teaspoon of JOSONJA Gloss Varnish into mixing container.  Add around a teaspoon of Pigment (I generally add a little more) into your container with the JOSONJA.  Mix until all Pigments have dissolved into a liquid making sure to stir any clumps out at this time. STEP #3-  COMBINING YOUR POURING MEDIUM & DISPERSED PIGMENTS Add around 3 Tablespoons of Pouring medium into your Dispersed Pigments.  Mix thoroughly being slow and folding rather than whipping, this will minimize the air bubbles.   STEP #4-  WHAT IF? -If your new mixed color seems to thick- Add a small amount of JOSONJA and stir until you reach the desired consistency. -If your new mixed color seems to thin- Add a small amount of Behr8300 (ONLY) and stir until you reach the desired consistency.   INDUSTRIAL, PLASTICS, & GLASS COATINGS RATIOS Vinyl Wrap And Plastic Films 5-10% By Weight Plastic Bottles 1-2% By Weight Masterbatch 10-30% By Weight Plastic Resins 0.2-0.5% By Weight Rubber Polymers And Latex 5-15% By Weight Glass 1-10% By Weight Candles 5-10% By Weight     GRAPHIC INKS & SCREEN PRINTING RATIOS Flexographic Inks (Packing Materials) 15-25% By Weight Offset Printing Ink 5-10% By Weight Screen Printing And Screen Inks 10-30% By Weight Textile Printing And Textile Inks And Pastes 5-10% By Weight Gravure Inks 5-15% By Weight     COSMETICS RATIOS Lotions 1-5% By Weight Lipstick And Pigmented Lipgloss 5-10% By Weight Eyeshadow 15-80% By Weight Nail Polish 5-25% By Weight Shampoo 0.1-2% By Weight   FIREARMS (CERAKOTE) RATIOS  Photo Courtesy: crawlinzx14 / Picture shows Eye Candy Colorshift over a black base. Our pigments can be used for both Cerakote and KG Gunkote clears. Below is just some references. 5 grams of pigment per 4oz Typically recommend a black base. For light colored pigments such as yellows, pinks, etc. you may want to try a light colored base. ALWAYS test before full application. 3 coats for full saturation. Some colors may require less. Stay with pigments with a 10-60um micron size. All particle sizes are listed on our product pages or you can find it on our Pigment Information List HERE.  Recommend using a .80 spray nozzle. Some use 1.0 for clears.   REQUEST SAFETY DATA SHEET (SDS) To request a safety data sheet, please contact us here:  Jeff@eyecandycustomz.com