G5 Voodoo Neo 4

G5 Voodoo Neo 4    The next generation of engine management for many more engines.  The G5 Voodoo Neo 4 can run: 6 cylinders port or direct injection and direct spark, or,  4 cylinders with direct/port staged injection, and direct spark   The G5 Voodoo processing units are the perfect choice for professional level motorsport. The G5 Voodoo Neo 4 works on a variety of vehicles, please contact a LinkECU Reseller or Technical Support for advice regarding your specific project. In the box: G5 Voodoo Neo 4 ECU USB-C Connection Cable WiFi Antenna 4m GPS Antenna (Magnetic or Adhesive Mount) USB-C and SMA Dust Covers QuickStart Guide (A5) Installer I/O table (A3) Link stickers New comms module: Up to 10x faster log file download speeds, from minutes to seconds, and enhanced WiFi and GPS Built in ethernet  1GB onboard logging in data storage unit 1 onboard wideband  CNC case, sealed enclosure 68 pins total (Link A and B 34 pin superseal connectors) K-line support  New WEIPU CAN connector, which supplies power for the CAN-bus.  Highly customisable IO, using 2 types of multi purpose pins: ADIO pins and Aux./Digital-Input pins. These pins can act as inputs or outputs. Can now power up via the USB cable, making firmware updates and setting up the initial tune a breeze at your PC. Runs on the same highly acclaimed PC Link software as G4X, meaning you don’t need to learn a new software package. You can open both G4X and G5 log and map files in the same software (G4X Map can also be loaded into a G5 Voodoo Pro) More mounting options than ever, with through holes and threaded mount holes on the side and underneath. All NEOs are direct injection capable, including staged port-DI on NEO 4 and 6.  Inputs/Outputs Control up to 6 cylinders with port or direct injection and direct spark, or 4 cylinders with direct/port staged injection, thanks to: 8 injector pins 6 ignition pins 12 aux. output pins  (4 Aux pins are shared with 4 DI Pins. You can only use each pin for either Injection or DI, not both at the same time.) 6 ADIO pins Highly customisable IO, using 2 types of multi purpose pins: ADIO pins,  and Aux./Digital-Input pins. These pins can act as inputs or outputs. ADIO are a unique pin type. ADIO can act as an Aux Output (switched or PWM), as an Analogue Input, or as a Digital Input, but cannot read PWM/frequency. Neo 4 has Aux/DI pins which are used as either an Aux pin, or a Digital Input pin. They can read PWM/frequency. Any unused injector/ignition pins can be used as an auxiliary pin All ignition and auxiliary pins are back feed protected. 3 analog inputs 10 digital inputs 4 temperature inputs 2 knock inputs 2 trigger inputs 1 x wideband lambda controller Dual H-Bridge e-throttle control  Dedicated ignition switch pin 5v sensor supply CAN 1 via Weipuconnector. CAN connector now supplies power and ground.    Communications USB-C (cable included) Power over USB WiFi: Connect directly to the ECU via built-in Wifi Access Point, or add it to an existing network (antenna included) CAN: New WEIPU connector supplies power for CAN devices Ethernet: Built in ethernet which can function like USB. Also adds the ability to connect to the ECU over a network.  GPS: Functional when GPS antenna connected (antenna included)   Data Logging  1gb logging capacity Logging over WiFi  100kHz max. total logging rate  250 logging channels   Size & Weight Length: 107mm (4.21 inches) Width: 158mm (6.22 inches) Max side height: 45mm (1.77 inches) Weight: 730grams (25.75 ounces)     Mounting 4x M5 threaded mount holes on the sides for bracket mounting  4x M5 threaded mount holes on the underside for clean mounting  4 x 5.5mm unthreaded through holes for mounting through (designed for use with M5 bolts)   Connectors  A Header Link Pin Kit A  TE Superseal 1.0 B Header Link Pin Kit B TE Superseal 1.0 Wi-Fi Wi-Fi Antenna  RP-SMA (reverse polarity)  GPS   SMA USB   USB Type-C Ethernet   WEiPU SF810B/P8 CAN1   WEiPU SF610B/P4