G35B9S16TW

Product Description The G35B9S16TW Booster Pump is a high-performance, multi-stage pump designed for a variety of demanding applications, including residential, commercial, and industrial water systems. With its advanced engineering and reliable performance, this pump ensures consistent water flow and pressure in even the most challenging environments. Powered by a durable motor, this pump delivers exceptional efficiency and is constructed from corrosion-resistant materials to ensure long-lasting performance. The G35B9S16TW features precision-engineered components for smooth operation, making it ideal for systems requiring stable and reliable water boosting. Whether used for reverse osmosis systems, water boosting, or general water circulation, the G35B9S16TW offers an optimal combination of efficiency, durability, and versatility to meet your specific water handling needs. Installation Manual Installation Instructions for G35B9S16TW Booster Pump Preparation: Inspect the pump and motor for visible damage during shipping. Report any issues to the carrier or dealer immediately. Ensure the installation site is level, stable, and provides adequate space and ventilation for motor cooling and maintenance. Verify that the pump model and motor specifications match the system requirements and application. Mounting the Pump: Secure the pump base to a flat, solid surface to minimize vibrations during operation. Align and support the suction and discharge piping to prevent undue strain on the pump. Install isolation valves on both the suction and discharge sides for easier servicing and maintenance. Piping Connections: Ensure piping matches the pump’s 1.5" FNPT inlet and outlet connections. Install gaskets or thread sealant to prevent leaks and ensure proper sealing. Remove any protective covers or caps from the connections before installation. Include a bleed valve in the discharge line for hot water systems to relieve pressure during servicing. Electrical Connection: Have a certified electrician verify the electrical supply matches the motor’s specifications (16 HP). Ensure proper motor wiring and confirm counterclockwise rotation when viewed from the motor’s rear. If rotation is incorrect, reverse any two leads on a three-phase motor to correct it. Priming the Pump: Remove the fill plug and fill the pump casing with water using a funnel. Open the vent plug to allow air to escape as the pump fills with water. Re-seal the vent and fill plugs once a steady stream of water flows from the vent. Initial Testing: Fully open the suction valve and partially open the discharge valve. Apply power to the motor and monitor for smooth operation without unusual noise or vibration. Gradually open the discharge valve to achieve the desired operating conditions. Safety Precautions: Never operate the pump without water to avoid damaging internal components. Replace coupling guards after installation to ensure operator safety. Ensure the pump is properly grounded and all connections are secure before starting.