G23 Head Plugs

G23 Head plugs:   KS Tuned stepped up with another H/F Series engine solution. This time for the Hybrid guys. When building a G23 (F23 block with a H22, F20B, or H23 VTEC Head) you will have 2 additional oil drain backs in the DOHC head that are absent in the F23 block. There are numerous ways to address this. You could source a qualified welder to weld the holes up and then have a machine shop surface the block. Cons: Time consuming and expensive. You could drill the holes to the proper hole size, then tap them with a pipe thread tap, and then finally install a pipe thread plug with a quality thread sealant. Cons: Will most likely need to purchase the proper drill size, tap, plugs, and thread sealant. Also you run the risk of getting metal shavings in your cylinder head. Simply install the KS Tuned G23 specialized cylinder head plugs. Using the 3 supplied Oil-Resistant Soft Buna-N O-Rings per plug, these plugs will slide into place and offer years of leak free service. Cons: You may also find other useful items to purchase while browsing our site. As you can see the most likely choice would be #3. Once you purchase and install our plugs, you will also notice that we offer one more benefit. Our G23 head plugs are threaded on the bottom. If you ever decide to change your cylinder head simply grab any M6 bolt thread it into the plug and pull out. This feature will allow you to insert and remove deep into the future without added expense.   Install Video: