FX Sculpture Base

FX SCULPTURE BASE is specially formulated for high density printing with a hard texture feel. Printed images can have either a smooth or textured surface depending on mesh counts and printing parameters. Sculpture Base controls the smallest design details–even with high-density printing. Highlights Smooth or textured hard surface and excellent edge definition Excellent performance with providing structure and shape for HD prints Tintable for infinite color combinations Excellent adhesion to fabrics, stretch properties, and wash durability Use by itself or intermix with other Infinite FX Bases for unlimited design effects Suitable for high-density or conventional flat screens Printing Tips Use consistent, high-tensioned screen mesh and sharp edged squeegees for best print results. Recommended mesh counts can vary depending on particle size For best HD results, use open mesh counts with 200 – 400 micron capillary film and print-flashprint. Use a heavy flood to fully fill the open areas of the stencil with ink then print with medium squeegee pressure Best when printed over a flash-dried underbase but suitable to be printed direct Adjust off-contact to imprint mesh patterns into Sculpture Base for textured feel and unique design effect Tintable with plastisol colorants. See Pigment Loading section for suggested starting tinting percentages. Reduce the amount of white colorant in the formula as specialty base will lighten the color Sculpture Base is commendable in keeping shape and providing structure for HD print designs. Use Sculpture Base by itself or combine with other Infinite FX bases for a unique effect Flash: 220°F (105°C) Cure: 320°F (160°C) Pigment Loading Up to 10% with Wilflex PC or comparable Up to 15% with Wilflex EQ or comparable Up to 30% with Wilflex RIO / MX or comparable Up to 15% with Rutland C3 Boosters or comparable