Futaba 26SZ

Description 26SZ Transmitter – 26-Channel Digital Proportional RC System 2-Stick, 26-Channel, FASSTest 2.4 GHz System (01004437-1) (01004438-1) (01004440-1) FEATURES FASSTEST SYSTEM: The 26SZ transmitter has adopted the bidirectional communication system “FASSTest.” Data from the receiver can be checked in your transmitter. FASSTest is a dedicated system with a maximum of 26 channels and 2.4 GHz. COLOR TOUCH SCREEN LCD: T26SZ has an HVGA 4.3 inch, full-color backlit LCD touch screen. The screen is transflective which enables both indoor and outdoor visibility. S.BUS2 SYSTEM: Using the S.Bus2 system, multiple servos, gyros, and telemetry sensors can be easily installed with a minimum of cables. MODEL TYPES: Multicopter. 8 swash types are available for helicopters. 7 types of main wings and 3 types of tail wings are available for airplanes and gliders. Functions and mixing functions necessary for each model type are set in advance at the factory. LIFE BATTERY: The 26SZ is operated by a 6.6 V/2,100 mAh Lithium Ferrite battery. SD CARD (SECURE DIGITAL MEMORY CARD) *NOT INCLUDED: Model data can be saved to an SD card (SD: 32MB – 2GB, SDHC: 4GB-32GB). When T26SZ transmitter software files are released, the software can be updated by using an SD card update. EDIT BUTTON: Two edit buttons are provided, and the operating screen can be immediately “Returned” to the HOME screen during operation. Setting operation can be performed easily by combining this button with a touch sensor. VIBRATION FUNCTION: Selects a function that alerts the operator to various alarms by vibrating the transmitter in addition to sounding a buzzer. SPEECH FUNCTION: A function is equipped to allow the system to provide audible telemetry data. This function can also be utilized with commercially available earphones. CONTENTS YOUR T26SZ INCLUDES THE FOLLOWING COMPONENTS: T26SZ Transmitter – Air Version includes ratcheting throttle – Helicopter Version includes smooth throttle R7208SB or R7214SB receiver LT2F2000 Battery Switch Harness Mini Driver *NOTE: The battery in the T26SZ transmitter does not arrive already attached to the battery connector. Please connect the battery connector before use. TRANSMITTER SPECS TRANSMITTER FREQUENCY: 2.4 GHz band SYSTEM: FASSTest26CH, FASSTest18CH, FASSTest12CH, T-FHSS, S-FHSS, switchable POWER SUPPLY: 7.5V FT2F2100BV2 LiPo battery FREQUENCY BAND: 2.4 GHz RF POWER OUTPUT: 100mW EIRP RECEIVER SPECS R7208SB SIZE: 24.9 x 47.3 x 14.3 mm 0.98 x 1.86 x 0.56 in WEIGHT: 12.0 g 0.42 oz POWER REQUIREMENTS: 7.4 V LiPo Battery CURRENT DRAIN: 75 mA RF POWER OUTPUT: 25 mW EIRP R7214SB SIZE: 50.2 x 37.0 x 15.9 mm 1.98 x 1.45 x 0.63 in WEIGHT: 20.8 g 0.73 oz POWER REQUIREMENTS: DC 3.7~7.4V VOLTAGE RANGE: DC 3.5~8.4V   Compatible receivers as of 10/1/24. S-FHSS PROTOCOL R2008GS R2008SB R2106SB R2001SB R2000SBM T-FHSS TELEMETRY PROTOCOL R3001SB R3004SB R3006SB R3008SB T-FHSS MONO (NON-TELEMETRY) R3206SBM R3106GF FASSTest12 and FASSTest18 R7003SB R7006SB R7008SB R7108SB R7014SB R7208SB R7214SB R7206SB