Fusor 129 Controlled Flow Epoxy Seam Sealer, Fast, 210ml, 3029746

Product Overview: Fusor®129 Controlled Flow Seam Sealer, Fast, 7.1oz/210ml (3029746) is a two-component, epoxy-based seam sealer used for duplicating factory appearance on roof channels, door seams, drip rails, trunk seams and truck bed floor seams. Fusor 129 seam sealer is fast curing and bonds extremely well to painted and two-component primed surfaces. Sealer can be applied directly to bare metal on rigid joints, however flexible joints, such as roof seams and drip rails, should always be primed. OEM approvals and recommendations include Ford, GM, Fiat, Chrysler, Honda and Acura. Two component cartridge is for use with the dual applicator (sold separately). Net contents are 210ml (7.1oz) and includes two Fusor 401T Red Power cartridge mixing tips with integral threads and two Fusor Ribbon Spreaders. Features and Benefits: High Performance – provides excellent adhesion to painted and two-part primed surfaces; apply on bare metal on rigid joints or on primed flexible joints such as roof seams and drip rails Versatile – bonds to epoxy or urethane two-component primed surfaces; weld through with minimal burn back; tolerates 400°F (204°C) powder coating cure for 30 minutes Excellent Appearance – easily duplicates factory appearance; provides extremely flexible seal with no shrinkage, cracking or sagging; applies in smooth continuous beads with no gun lines Environmentally Resistant – provides excellent corrosion protection Easy to Finish - can be tooled, but is not required for factory look, cured sealer may be sanded to a featheredge Technical Properties: Appearance: Beige paste Base Chemistry: 2K Epoxy Work Time: 5 minutes @ 70°F (21°C) Sand Time: 30 minutes @ 70°F (21°C) Paint Time: 30 minutes @ 70°F (21°C) Cure Time: 1 hour @ 70°F (21°C) Data sheet: download here Fusor Adhesives Repair Catalog: download here Videos: