Fusor® 800DTM Direct-to-Metal Sealer Neutral 10 oz.

Fusor® 800DTM direct-to-metal sealer is a one-component, moisture-cure product used for duplicating factory appearance on standing seams and cosmetic seams in automotive collision repair and industrial heavy duty truck, bus and trailer repair. Typical applications include: truck bed seams, trailer sidewall and window sealing, tooled door skin seams, floor pan seams, core support seams, brushed seams and other applications in which a non-sag cosmetic seam sealer is required. Fusor adhesive/sealant is available in the following colors: • Neutral – Fusor 800DTM Sealer = 10 oz (296 mL) • White – Fusor 801DTM Sealer = 10 oz (296 mL) • Black – Fusor 803DTM Sealer = 10 oz (296 mL) Shelf Life Shelf life is 15 months when stored in a well ventilated area at or below 80°F (27°C) in original, unopened container. Once cartridge has been opened, leave the dispense tip on to act as a seal against moisture. Substrates Bare metal, Cold rolled steel, E-coat and Aluminum; Silane Terminated Polymer 1K chemistry OEM Approvals • GM, Nissan, Ford, Volvo, Acura, Honda: Collision/warranty repair Features and Benefits Durable – creates high strength bonds with or without primer; exhibits excellent primerless adhesive properties. Convenient – single component requires no mixing; skins over quickly at room temperature, reducing cycle time. Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility Easy to Use – easily dispensed; can be tooled and/or painted immediately. Excellent Appearance – duplicates all types of OEM seals; holds brush marks without die back; weld-through with no burn back. Chemically Resistant – solvent resistant when cured. Painting and most cleaning processes do not affect bond strength. Temperature Resistant – uncured material can endure 225°F (107°C) for 60 minutes, and cured material can endure 325°F (163°C) for 60 minutes with no negative effect. Environmentally Resistant – resists weathering and aging; provides excellent resistance to indirect UV exposure. Applications Duplicates factory appearance on standing seams and cosmetic seams in automotive collision repair and industrial heavy duty truck, bus and trailer repair. Typical applications include: truck bed seams, trailer sidewall and window sealing, tooled door skin seams, floor pan seams, core support seams, brushed seams and other applications in which a non-sag cosmetic seam sealer is required Typical Properties* Appearance Neutral, White or Black Paste Base Chemistry Silane Terminated Polymer (STP) Skin Time** 25 minutes @ 70°F (21°C), 50% RH Paint Time Immediately; Up to 30 days without a scuff Full Cure 72 hours @ 70°F (21°C)