Fusor® 126 Non-Sag Seam Sealer (Fast) 50ML

Fusor® 123/126 sealer is a two-component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams. Fusor 123/126 sealer is used in applications which require a non-sag cosmetic seam sealer with reduced cycle time. Sealer can be applied directly to bare metal or primed surfaces. Fusor 123 = 10.1 oz (300 mL) Fusor 126 = 1.7 oz (50 mL) Shelf Life Shelf life is 24 months from date of manufacture when stored at 75°F (24°C) in original, unopened container. Substrates Apply over 2K primers; urethane 2K chemistry OEM Approvals Honda, Acura Features and Benefits High Performance – provides excellent adhesion to bare or primed surfaces. Versatile – bonds bare metal, epoxy or urethane two-component primed surfaces; weld through with minimal burn back. Excellent Appearance – easily duplicates factory appearance; provides extremely flexible seal with no shrinkage, cracking or sagging. Environmentally Resistant – provides excellent corrosion protection. Easy to Finish – can be tooled, wiped clean, sanded and/or painted immediately. Applications Duplicates factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non-sag cosmetic seam sealer is required and where fast work time is desired Typical Properties* Appearance White Paste Base Chemistry Urethane Work Time 3 minutes @ 70°F (21°C) Paint Time** 10 minutes @ 70°F (21°C) Full Cure 24 hours @ 70°F (21°C)