Full-Race 2021+ Ford Raptor 3.5L EcoBoost Formline Turbo Kit

Full-Race 2021+ Ford Raptor 3.5L EcoBoost Formline® Turbo Kit The Full-Race Formline® Turbo Kit transforms the 2021+ Ford Raptor 3.5L EcoBoost into a powerhouse capable of delivering up to 700 horsepower while maintaining OEM-level drivability and long-term reliability. Designed as a complete, plug-and-play upgrade, this system eliminates the guesswork often associated with turbo builds. Engineered around Garrett PowerMax™ Stage 2 turbos and Full-Race’s high-flow Formline® manifolds, the kit offers exceptional performance, heat management, and durability. Every component is precision-matched to work seamlessly, giving enthusiasts real-world power without compromise. Key Features 100% Bolt-On Installation: Direct-fit design uses factory mounting points with no need for cutting, fabrication, or modifications. Garrett PowerMax™ Stage 2 Turbos: Proven performance delivering greater airflow, efficiency, and high horsepower potential. Formline® GEN3 Manifolds: High-flow cast stainless manifolds re-engineered for the GEN3 engine’s EGR system to reduce backpressure and improve reliability. SPD Catted Downpipes: Custom-built for optimal exhaust velocity and emissions compatibility. *NOTE: These are custom-built for this kit – not the same as standard SPD downpipes. K&N High-Flow Turbo Inlets: Improved airflow for enhanced turbo efficiency and power output. Upgraded AN-Style Coolant Lines: Heat-resistant, leak-free replacements for factory lines. Complete Installation Kit: Includes hardware, couplers, and seals for a smooth, straightforward installation. Tuning Compatibility: Tested and tuned by MPT Performance for dependable power delivery. Benefits Serious Power Gains: Supports 500–700+ horsepower depending on fuel type, tune, and supporting modifications. Daily Drivability: Maintains OEM-like response and smooth throttle behavior for both street and performance driving. Proven Reliability: Components built to handle high heat, boost, and daily use. Warranty Aware: While aftermarket upgrades can impact vehicle warranty coverage, this kit’s bolt-on design minimizes risks when professionally installed. Peace of Mind: Backed by Full-Race’s commitment to performance engineering and real-world testing. Dyno Results Here's a dyno graph comparing stock with some mods against MPT's 91 PR-X, 93 PR-X, and E50 PR-X Custom Tunes. That's almost 300HP and over 170 in TQ over stock! Product Specifications Part Number: 2021-2023: A0227A 2024-2025: A0236A Compatible Turbos: Garrett PowerMax™ Stage 2 Manifolds: Formline® GEN2-adapted for GEN3 EcoBoost (Ceramic-coated silver) Downpipes: Custom SPD catted design* Inlets: K&N High-Flow Material: Cast stainless steel manifolds, AN-style high-temp coolant lines Horsepower Potential: Up to 700 WHP (recorded results: 690 WHP / 633 WTQ on E50 fuel at 27 PSI) What’s Included (2) Formline® GEN2-Adapted Manifolds for GEN3 - Ceramic-coated Silver (2) Gen2 Powermax Turbos (1) Install Kit (1) Custom SPD Catted Downpipe (1) K&N Inlets (2) Wastegate Harness (2) Outlet Coupler Install Difficulty Level This turbo kit is designed for straightforward, bolt-on installation using factory locations and connections. Most shops quote approximately 14 hours of labor for a full installation. Enthusiasts with moderate mechanical skills can handle the job with patience and proper tools. Professional installation is recommended to ensure optimal results, tuning accuracy, and warranty protection. Important Note: Gen3 Formline manifolds will not work with this kit. Vehicle Fitment 2021–2025 Ford Raptor 3.5L EcoBoost 2021–2025 Ford F-150 3.5L EcoBoost NOTE: Requires Raptor-style dual exhaust midpipe and custom dual exhaust system FAQ Click the question for more information •Do I need a tune? Yes. A custom tune is necessary to fully optimize your vehicle's performance and ensure compatibility with aftermarket modifications. •Will this fit the 2021+ F-150 3.5L EcoBoost as well?? This kit was designed to be a complete bolt-on upgrade for the 2021+ Ford Raptor 3.5L EcoBoost. Full-Race have found that it can also fit the 2021+ F-150 3.5L EcoBoost, but it requires a Raptor-style dual exhaust midpipe and a custom dual exhaust system. •Is professional installation required?? While the 2021+ Ford Raptor 3.5L EcoBoost Formline® Turbo Kit is designed for hassle-free installation, professional installation is strongly recommended. •Are these the same as regular SPD downpipes? No. These are custom SPD downpipes made specifically for this turbo kit. While based on SPD’s proven design, they differ from the off-the-shelf version in fitment and geometry. •What is the typical labor time for installation? Installation time can vary depending on the shop and your specific setup, but most shops quote around 14 hours of labor to install the full kit. •Are the manifolds in this kit the same as the Formline® GEN3 Manifolds sold separately? Not exactly. The manifolds included in this kit are adapted Formline® GEN2 manifolds, re-engineered to fit the GEN3 3.5L EcoBoost’s cooled-EGR system. They offer the same flow and durability advantages as the standard Formline® design but were developed exclusively for this turbo kit to allow fitment with the 2017-2020 Garrett PowerMax Stage 2 turbos. The Formline® Manifolds for the 2021+ Ford F-150 & Raptor feature a unique casting optimized for direct replacement and standalone installs, but they are not interchangeable with the manifolds or turbos in this kit. •Will this affect my vehicle’s warranty? Any aftermarket part can affect your warranty. Consult your warranty agreement or dealer to understand the impact of these upgrades on your coverage. •What kind of performance gains can I expect? The Full-Race Formline® Turbo Kit is engineered to deliver significant increases in horsepower and torque, enhancing overall performance and drivability. The included Garrett PowerMax™ Turbos offer the potential for anywhere from 400 to 700+ WHP with supporting modifications. However, actual gains may vary depending on various factors such as vehicle condition, fuel quality, and tuning. CARB Compliance As of the latest manufacturer information, this turbo kit has not been issued a CARB Executive Order (EO) number and is not CARB-approved for use on emissions-controlled vehicles in California. It is not legal for sale in California and is intended for off-road or race use where emissions compliance is not required. For questions about this product or to report product description inaccuracies, contact the MPT Performance experts at (407) 636-7077 or by email.