Fuel-It! Walbro 255LPH Stage 1 LPFP Upgrade E8X, E9X

These kits are designed to be installed inline with your stock low pressure fuel pump (LPFP).  They provide approximately 50% more flow when combined with your stock pump and can be purchased with or without the Walbro GSL392 pump. Complete Kit: Is the complete upgrade kit that also includes the Walbro 255LPH GSL392 pump, comes fully assembled, and ready to install with your stock LPFP. Install Kit: This is a complete install kit for your Walbro GSL392 pump and does not include the pump.  Both options include the following: SAE J30R10 E85 compatible fuel line 14ga fuel resistant wiring harness Quick connect female bullet connectors (2) Vent tube replacement clip Nylon cable ties (10) Stainless steel lock nuts (2) 10ga/14ga stepdown butt splices w/E85 compatible heatshrink (2) Pushlock pump retention fittings (2) 14ga butt connectors w/heatshrink for pump removal to return to stock if/when desired (2) Recommended accessories: Lock Ring Removal Tool  Compatible with the following vehicles: 1' E88         (11/2006 — 10/2013) 1' E82         (11/2006 — 10/2013) 3' E90         (02/2004 — 09/2008) 3' E90 LCI   (07/2007 — 12/2011) 3' E91         (02/2004 — 08/2008) 3' E91 LCI   (07/2007 — 05/2012) 3' E92         (05/2005 — 02/2010) 3' E92 LCI   (11/2008 — 06/2013) 3' E93        (09/2005 — 02/2010) 3' E93 LCI   (11/2008 — 10/2013) X1 E84       (04/2009 — 06/2015) *Note:  Walbro does not warranty this pump for E85 use.  If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit. ** IMPORTANT:  Do NOT attempt to run this kit inline with our Stage 2 kit.  The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.