Front Slotted Squeegee Blade (#MPVR08039) for IPC Eagle 20" & 24" Floor Scrubbers - Red Latex

This red latex rubber front replacement squeegee blade fits perfectly onto almost all of the 20" and 24" IPC Eagle automatic floor scrubbers (specifically fits the CT40B50, CT40BT50, CT70B50, CT70BT50 & CT70BT60 models). It is slotted to allow solution through into the vacuum chamber for it to be recovered. Order a rear replacement squeegee to complete the set, and you'll be recovering as close to 100% of your solution as you can get. This squeegee blade can be used on all four sides, which utilize every surface, making it a much more sustainable option than the competition. You can use the front side of the squeegee, then rotate, so the back side is facing forward. Once those 2 surfaces are exhausted, you can then flip it upside down, and use both of those surfaces. This squeegee system is revolutionary, because of how easy it is to change your squeegees. No tools are required to switch your blades, and can easily be done within a few minutes. We recommend rotating your squeegees every 20 hours of scrubbing, so they wear evenly. *Please Note: Any front squeegees bought for 20" & 24" auto scrubbers with serial numbers before 8000189164 for 20" machines and 8000189411 for 24" machines should purchase the MPVR45194 squeegee. You can order these older model squeegees by calling customer service at 1-888-722-5508. The older MPVR45194 squeegee is more expensive than this current model.