Friedrich Breeze 2 Ton Breeze Central Ducted Heat Pump Split System

The Friedrich Breeze 2 Ton Central Ducted Heat Pump Split System features a rotary inverter compressor that delivers 24,000 BTU of both cooling and heating capacity, keeping your home comfortable year-round while reducing energy waste. Built to handle wide temperature swings, this heat pump operates from -4 to 115 degrees F and uses low-global warming potential R-454B refrigerant, keeping your home efficient and eco-friendly while delivering consistent performance across that range. Note: This model requires professional installation and does not include a 3/8 x 5/8-inch line set. Key Features and Benefits of the Friedrich Breeze 2 Ton Central Ducted Heat Pump Split System with Surge Protector Inverter Compressor: The Precision Inverter rotary compressor ramps output up and down to match your set temperature precisely, eliminating the energy spikes and temperature swings of traditional on/off cycling. Energy Efficiency: Rated at 18.0 SEER2 and 10.0 EER2, this system helps lower your monthly energy costs and may qualify for federal tax credits. Cold-Climate Heating: Heating mode operates down to -4 degrees F. This system carries Energy Star Cold Climate certification for reliable performance through harsh winters. Variable Speed: Variable-speed operation delivers up to 3,150 CFM, automatically adjusting airflow to maintain even temperatures throughout your home instead of cycling between extremes. Quiet Performance: Sound levels start as low as 35 dB, with a maximum indoor noise level of 55 dB, so the system runs quietly enough to avoid disrupting conversation or sleep. Flexible Installation: Supports line set runs up to 100 feet and height differentials up to 66 feet, giving your installer flexibility to position the outdoor condenser where it works best. Surge Protection: The bundled TP-VRMDC-KIT surge protector shields the system's electronics against power spikes, helping you avoid unexpected repair costs from voltage irregularities. The kit includes the TP-VRM-60A, TP-SPD-50, and 60A disconnect breaker in a NEMA 3R enclosure. Certified Performance: AHRI certified, cETLus listed, and Energy Star certified, meeting recognized safety and efficiency benchmarks. Planning Your Breeze Installation This 2-ton split system requires professional installation and runs on 208-230V power, so confirm that your electrical panel can support the circuit before scheduling work. The indoor air handler measures 46.12 x 19.62 x 21.62 inches (H x W x D) and weighs 130.5 pounds, meaning you'll need adequate closet or utility room clearance for a floor-mount setup. The system does not include the required 3/8 x 5/8 line set, so your contractor will need to install one based on the actual run distance between your indoor and outdoor equipment. Sylvane's Expert Take If you're a contractor specifying a replacement condenser that needs to work with existing indoor equipment, the Friedrich Breeze simplifies the job. The -4 degrees F heating capacity means you can confidently position this system as a primary heat source through cold snaps without recommending supplemental backup, making your proposals more competitive and keeping your customers' ongoing energy costs predictable.