Foil Adhesive 4 oz

Foil Adhesive Please read the freeze warning disclaimer below! You will love ArtsSyVille Foil Adhesive, it only takes one coat - this alone will save you time and money. Apply one coat using a low-nap roller and allow to dry to a firm tack (approximately 1 to 2 hours - longer in high humidity areas) and apply your foil for a near flawless release. Soap and water clean-up. If you are working on a non-porous surface (i.e. hard plastic) the surface must be prepped with a base coat of paint. Foils will not transfer to a non-porous surface that has not been properly prepped. ArtsSyVille Embellishments Foil Adhesive is permanent transfer adhesive that  works on just about any surface except fabric.  You can use it on wood, paint, furniture, walls, crafts, etc.  Use with our Metallic Foils to quickly and easily add a foil finish to you projects.  Directions for use: Always pre-test for best results.  Step 1 -  Apply a base coat of paint to project that is complimentary  to the foil color you are using and allow to dry.  Step 2 -  Apply one coat of the Foil Adhesive to your surface by  brush or roller. The material dose not self-level, so apply in  one direction and try to smooth out your brush strokes.  Step 3 -  Allow the Foil Adhesive to dry for no less than 1 hour. It  will dry to a firm tack and will never dry beyond this firm  tack.  Step 4 -  Once dry, place foil, color side facing up, on top of the  adhesive surface.  Step 5 -   To transfer, rub the foil with a soft rag and/or a plastic  bristle scrub brush. Slowly peel back foil sheet away to see  if you have enough transfer, if not, place foil back down  and scrub more.  Protection: Foils need to be protected, make sure to apply at least one coat of  you favorite top coat & make a sample first to see how the top coat effects the  foils sheen