FluidPRO Transmission Fluid Exchange System | MAHLE | ATX 280

The FluidPRO® ATX-3 Automatic Transmission Fluid Exchange System offer precise and accurate fluid measurement with minimal technician input to maximize efficiency. Designed for ease of operation, the ATX-3 provides fully automatic operation for automotive fluid exchange servicing. Backed by the MAHLE name for superior quality, each ATX is crafted for maximum uptime and less maintenance. FluidPRO ATX-3 Transmission Fluid Exchange System Features Adaptable. 'Dipstick' or 'Cooler' mode selector, start engine indicator (ATX-3 only). Electronic Diode Illuminated Keypad. Fluid flow direction indicator verifies correct hook-up. Transmission Diagnostic Pressure Gauge. For a more effective exchange process. New and Used Fluid Sight Glasses. Improve service accuracy. Automatic Fluid Level Adjustment. +/- 1/2 quarts. Digital Weight Scale. Technology for accurate fluid exchange. Patented Bypass Circuit. Increased safety for vehicle protection. Fast. Full exchange service times of 2 to 5 minutes and 8 to 14 minutes in 'Dipstick' mode. FluidPRO ATX-3 Specifications Adapters Cooler line connection. Valved couplers for minimum spill. Standard adapters for Ford, GM, Chrysler, & Universal (most Asian). Controls Microprocessor with digital keypad & light emitting diodes Dimensions (H x W x D) 45 in x 28 in x 26.5 in (112 cm x 70 cm x 67 cm) Fluid Tanks / Types 26 quarts (24.6 liters) each for both new & used fluids / Multiple fluid capability Hoses 10 ft. (3 m) black & red (exchange); 8 ft. (2.5 m) black (empty used tank) ATX-3+Boost also includes 5 ft. (1.5 m) clear, attached to 8 ft. (2.5 m) lack hose for dipstick mode. New Fluid Pump Positive displacement gear pump, 4 quarts (3.8 liters) per minute/includes diaphragm pump, 7.2 quarts (6.84 liters) per min. Diaphragm pump increases fluid suction rate in low-flow/temperature controlled transmission in both ATX-2+Boost & ATX-3+Boost units. Operating Range Cooler Mode: 32° to 122°F (0° to 50°C) Dipstick Mode: 42° to 122°F (5.5° to 50°C) Power Source 12 VDC - 10 Amp Process Time 3 to 6 minutes average full exchange. Dipstick Mode is available on the ATX-3+Boost with 8 to 14 minutes average full exchange (Based on 12 quart exchange). Scale Accuracy ±0.03% over usable range Weight ATX-2+Boost: 242 lbs. (110 kg) / ATX-3+Boost: 244 lbs. (111 kg)