Floor/Rail Mount Boat Pal

The BoatPal fits most, but not all boats. Bumper not included The BoatPal was designed with low profile ski boats in mind, but it will fit many other recreational boats as well. If your boat has any hand rails, it will work just fine. We can also provide hardware to install a floor mount that will make for unobtrusive bumper attaching. Dimensions The BoatPal uses standard size bumpers. The BoatPal can apply safely to bumpers between 4" and 6.5" circumference and 18" to 22" in length. It is preferable to use bumpers that have an eye-hole for the tail-strap at the bottom of the harness. The Floor/Rail mount style is 52" long. What to Measure It is important to make sure that the size of your boat is within the BoatPal's capabilities. For the Floor/Rail mount style, depending on the available hardware (handrails, hand grips or optional Footman Loop mounting bracket), the range of connection is 6" to 41". Material The BoatPal uses Polypropylene webbing as well as Hook/Loop quick and versatile fastening. Attaching "BoatPal" to Fender: 3 Straps of reference: Main (longest strap in the harness), Legs (2 straps ot equal length), Tail (smaller strap connected to Main and 1 Leg Strap). After removing BoatPal from packaging, fully extend Boatal on a level surface. Ensure the Main Strap is lying on top of the leg straps. Position Boat Fender on Main Strap so that the Leg Straps are able to wrap around (hug) the Boat render. Attach the Tail strap through the bottom eye of the fender. If the fender does not have eye holes, the tall can be folded up along the main strap to be out of the way. Wrap the Leg Straps around the tender and secure. Attach BoatPal to vessel as appropriate