Floating Acrylic Frame

The Floating Acrylic Display Frame is a premium signage and artwork solution designed for modern galleries, high-end retail, and luxury office interiors. By elevating your graphics into the third dimension, this frame transforms standard information into a sophisticated visual statement.                                               Installation Steps 1. Prepare Your Graphic Place your logo or artwork between the two acrylic panels. Align the pre-drilled holes in the acrylic with the corners of your graphic. 2. Mark Your Drill Points Hold the back acrylic panel against the wall at your desired height. Use your level to ensure the panel is perfectly horizontal. Mark the center of the four pre-drilled holes on the wall with your pencil. 3. Install the Standoff Bases Drill pilot holes at your pencil marks and insert wall anchors if mounting into drywall. Unscrew the "cap" from the standoff barrel. Drive the mounting screw through the standoff barrel and into the wall anchor until flush. 4. Mount the Acrylic Panels Hold both acrylic panels (with the graphic sandwiched inside) up to the standoff barrels. Insert the standoff caps through the acrylic holes and screw them into the barrels by hand. Pro Tip: Do not over-tighten; hand-tightening is sufficient to secure the frame without stressing the acrylic.                                               Preparation Tips Paper Weight: Use a heavy cardstock or semi-gloss photo paper to ensure the graphic stays flat and crisp between the two acrylic sheets. Double-Sided Use: Because the frame is transparent, you can place two graphics back-to-back for a double-sided display in windows or open floor plans. Centering: Use a small piece of clear double-sided tape in the center of the back panel to hold your graphic in place while you secure the front panel and standoffs.