Flat End Full Rack Assembly w/ HDRs

This Is A Complete Flat End Wide Full Rack Assembly With All Required Hardware &  Hybrid Death Rails. This Rack System Comes Powdercoated In A Fine Textured Black - For This Assembly In A RAW Finish*, Click HERE . The Overall Rack Length & Width Will Be Determined Through The Choices Above. Each Full Rack Assembly Contains The Following: (2) Flat Ends (Driver & Passenger Sides) (2) Short Ends (Driver & Passenger Sides) (2) Hybrid Death Rails Sets (Full Rack Length) (Determined By Length) Intermediate Assemblies (DBL) HDR Side Supports & Hardware (DBL) Connector Slugs (DBL) Connector Slug 316 Stainless Hardware Sets  (DBL) Threaded Slugs (DBL) Threaded Slug 316 Stainless Hardware Sets (DBL) Crossbars (Of Selected Width) (DBL) Standard Hinge Or Rain Gutter Mounts (Selection Confirmed After Order Is Placed) Optional Selections LENGTH Choose Overall Rack Length Measurement (Outside Of Rack Tube To Outside Of Tube, With This Configuration The Useable Basket Area Would Be 8" (20.32cm) Shorter Than The Overall Rack Length) WIDTH Choose Overall Rack Width Measurement (Outside Of Rack Tube To Outside Of Tube, With This Configuration The Useable Basket Area Would Be 2" (5.08cm) Shorter Than The Overall Rack Width) REMINDER: Each Full Rack Assembly Requires A Mounting Selection After The Rack Is Purchased, Standard Hinge / Rain Gutter Mounts Are Included In This Assembly, HD Mount Upgrades Are Available And Can Be Selected Below. *Corrosion Resistance Is Only Achieved Through A Post Applied Finish On The Raw Aluminum Components (I.E - Powdercoat Or Anodizing). Raw Finish Will Not Provide ANY Corrosion Resistance And MUST Be Coated Before Installation.