Flame Demon Dildo Red and Black 7.3 Inch

A red and black flame shaped dildo with a ridged spine and a swollen knot above the base, 6.3 inches insertable, on a wide suction cup that holds. This is the dark end of the fantasy shelf. The silicone is poured so the red bleeds through the black in flame shapes rather than sitting in flat bands, and the sculpting follows it: a row of ridges up the front, grooves and bumps around the sides, and a thick bulge just above the base that you feel on the way in and again on the way out. It is shorter than it looks and wider than it reads. 6.3 inches insertable with 2.1 inches at the widest point, so the demand it makes on you is girth and texture rather than depth. The core is firm while the outside stays soft, which is what lets the ridges actually press instead of folding flat. The base is a broad black suction cup. Stick it to a floor, a wall or the side of the tub for hands free, or seat it in a harness and let someone else do the work. It pairs with our Devil Horn Strap On Harness, which is the black harness with red horns. Why this works Ridged spine and textured sides give you something to feel on every stroke, in both directions Knot shaped bulge above the base delivers a distinct pop rather than a smooth taper 2.1 inches at the widest in a 6.3 inch insertable, so it is a girth toy rather than a depth one Firm core with a soft silicone surface, which is what keeps the texture from flattening out under pressure Wide suction cup base grips smooth flat surfaces for hands free use Flared base fits most harness O rings for pegging Red and black flame coloring runs through the silicone, so it will not rub off The specs Overall length: 7.3 inches Insertable length: 6.3 inches Diameter at the narrowest: 1.1 inches Diameter at the widest: 2.1 inches Material: premium phthalate free silicone Color: red and black Base: wide suction cup, harness compatible Weight: 12 ounces Care Warm water and mild soap or a toy cleaner after every use. Pay attention to the grooves, since texture is where residue hides, and a soft brush helps. Pat dry and let it air out fully. Water based lubricant only, because silicone lubricant degrades silicone. Store it apart from other silicone toys and out of direct sunlight. Use it for Hands free riding on a flat surface, pegging and strap on play, knot and texture play, and any scene where you want the toy to look like it came from somewhere other than a drawer. FAQ Is this a beginner toy? No. 2.1 inches at the widest plus a knot and a ridged spine is a lot of texture at once. If you have not used a textured fantasy shape before, a smooth spiral is the easier place to start. What does the knot do? It is a thicker bulge sitting just above the base, so it takes a moment of pressure to pass and then gives way. Some people find that the best part and some find it the limit. It is the feature that divides opinion on this shape. Will it fit my harness? The base is flared and flat, which is what an O ring holds. A 2 inch ring is the safe pick for the shaft. Our Devil Horn harness includes 1.25, 1.5 and 2 inch rings. Does the suction cup hold weight? Yes on smooth, clean, flat surfaces. Tile, sealed floor, a tub wall, a mirror. It will not hold on grout, textured wood or anything porous. Will the red and black rub off? No. The color is in the silicone, not painted on. It will not transfer to skin or fabric. What lubricant do I use? Water based only. Silicone lubricant breaks down a silicone toy over time. Use a bit more than you think with a textured shape, since the ridges pull lubricant away as you go. Is it discreet? The toy is not, and it is not meant to be. All orders from The White Unicorn ship in a plain package, and the return label will read TWU or shipping department.