
$4.50
See if it's really the one
Search with this product to compare it, find similar styles, or turn up something better before deciding.
Flair Espresso Temperature Strips are self-adhesive liquid-crystal thermometers designed to give home baristas a clear, at-a-glance temperature reading on brew heads and milk steamers. Each strip measures 2.25 x 0.5 inches and is available in two ranges: High Heat (158–212°F / 70–100°C) for brew head preheating, and Low Heat (77–149°F / 25–65°C) for milk steaming and frothing. Read Temperature at a Glance Flair Temperature Strips use a color-window display that shifts from tan or reddish-brown through green as the surface warms. The green window marks the actual temperature, the tan window sits above it, and the blue window falls below it, so you can identify your target range without a separate thermometer or guesswork. For lever espresso, knowing when the brew head has reached temperature before adding water is one of the most direct ways to improve shot-to-shot consistency. Two Ranges, Two Jobs The High Heat strip covers 158–212°F (70–100°C), the range relevant to brew head preheating on manual espresso makers. The Low Heat strip covers 77–149°F (25–65°C), the range used when steaming or frothing milk to the point where latte art becomes achievable and repeatable. Choosing the right range means the color windows fall where you actually need them, rather than bunching at one end of the scale. Moisture-Resistant and Simple to Apply Each strip has a self-adhesive backing rated moisture resistant, with an estimated adhesive shelf life of two years (actual life varies with application and use). Before applying, the surface should be clean and dry; during application, the strip should lie flat with no gaps or air pockets where water could seep behind it. Once in place, the strip stays put through normal use without tools or recalibration. Features High Heat range: 158–212°F / 70–100°C, sized for brew head preheating Low Heat range: 77–149°F / 25–65°C, sized for milk steaming and frothing Three-color display: tan (above), green (actual), blue (below) for instant reading Self-adhesive backing: moisture resistant, estimated two-year adhesive shelf life Compact footprint: 2.25 x 0.5 inches, fits cylinders and flat surfaces Specifications Specification High Heat – Brew Heads Low Heat – Steamers & Frothers Temperature Range 158–212°F / 70–100°C 77–149°F / 25–65°C Dimensions 2.25 x 0.5 in 2.25 x 0.5 in Backing Self-adhesive, moisture resistant Self-adhesive, moisture resistant Adhesive Shelf Life Est. 2 years (varies with use) Est. 2 years (varies with use) Quantity per Pack 1 strip 1 strip Who This Is For and Isn't These strips suit anyone using a manual lever espresso maker or a stovetop or electric milk steamer who wants a simple, permanent-mount way to confirm surface temperature without picking up a separate probe thermometer each time. They are a practical addition to any Flair espresso setup where brew head preheating or milk temperature consistency matters. These strips are not a substitute for a calibrated probe or digital thermometer where precise numeric accuracy is required. Each pack contains one strip; buyers needing strips for both a brew head and a steamer should select one of each variant. The strips are not rated for immersion in liquid. Common Questions What is the difference between the High Heat and Low Heat strips? The High Heat Flair Temperature Strip reads 158–212°F (70–100°C) and is intended for monitoring brew head surface temperature before adding espresso water. The Low Heat strip reads 77–149°F (25–65°C) and is sized for the lower temperature range used when steaming or frothing milk. Selecting the range that matches your use case keeps the color windows centered where you need them. How do I read the color display on a Flair Temperature Strip? As the Flair Temperature Strip warms, its windows shift color. The green window indicates the actual surface temperature at that moment. A tan or reddish-brown window sits above the current temperature, and a blue window falls below it. Reading the green window gives you the current reading without any math or interpolation. How do I apply the strip so it stays in place? Before applying a Flair Temperature Strip, clean and dry the surface completely. Press the strip flat against the cylinder or surface so no gaps or air pockets form between the adhesive and the surface; trapped air or moisture can cause the strip to lift or allow water to seep behind it. The self-adhesive backing is moisture resistant once properly seated. How long does the adhesive last? Flair rates the adhesive shelf life at approximately two years, though actual longevity varies depending on the surface, frequency of use, and exposure to moisture or heat. The strip is not designed for removal and reapplication; plan the placement before pressing it down. New to Flair? Video tutorials, manuals and the Flair Buyer's Guide are on the Flair Espresso Learn page.
Have a question about this?
We currently ship within the US, with more countries coming soon.
Final cost and dates are confirmed at checkout.
🇺🇸 Ship from USA · On Agora since 2025
$4.50